DMA Device Interface Functions More...
#include <stdbool.h>
#include <stdint.h>
#include "sw/device/lib/base/macros.h"
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_base.h"
#include "dt/dt_dma.h"
Go to the source code of this file.
Data Structures | |
struct | dif_dma |
A handle to dma. More... | |
Macros | |
#define | kDifDmaIrqDmaDone kDtDmaIrqDmaDone |
A dma interrupt request type. | |
#define | kDifDmaIrqDmaChunkDone kDtDmaIrqDmaChunkDone |
Indicates the transfer of a single chunk has been completed. | |
#define | kDifDmaIrqDmaError kDtDmaIrqDmaError |
DMA error has occurred. | |
Typedefs | |
typedef struct dif_dma | dif_dma_t |
A handle to dma. | |
typedef enum dif_dma_alert | dif_dma_alert_t |
A dma alert type. | |
typedef dt_dma_irq_t | dif_dma_irq_t |
typedef uint32_t | dif_dma_irq_state_snapshot_t |
A snapshot of the state of the interrupts for this IP. | |
typedef uint32_t | dif_dma_irq_enable_snapshot_t |
A snapshot of the enablement state of the interrupts for this IP. | |
Enumerations | |
enum | dif_dma_alert { kDifDmaAlertFatalFault = 0 } |
A dma alert type. More... | |
Functions | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_init (mmio_region_t base_addr, dif_dma_t *dma) |
Creates a new handle for a(n) dma peripheral. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_init_from_dt (dt_dma_t dt, dif_dma_t *dma) |
Creates a new handle for a(n) dma peripheral. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_get_dt (const dif_dma_t *dma, dt_dma_t *dt) |
Get the DT handle from this DIF. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_alert_force (const dif_dma_t *dma, dif_dma_alert_t alert) |
Forces a particular alert, causing it to be escalated as if the hardware had raised it. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_get_type (const dif_dma_t *dma, dif_dma_irq_t, dif_irq_type_t *type) |
Returns the type of a given interrupt (i.e., event or status) for this IP. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_get_state (const dif_dma_t *dma, dif_dma_irq_state_snapshot_t *snapshot) |
Returns the state of all interrupts (i.e., pending or not) for this IP. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_is_pending (const dif_dma_t *dma, dif_dma_irq_t, bool *is_pending) |
Returns whether a particular interrupt is currently pending. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_acknowledge_state (const dif_dma_t *dma, dif_dma_irq_state_snapshot_t snapshot) |
Acknowledges all interrupts that were pending at the time of the state snapshot. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_acknowledge_all (const dif_dma_t *dma) |
Acknowledges all interrupts, indicating to the hardware that all interrupts have been successfully serviced. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_acknowledge (const dif_dma_t *dma, dif_dma_irq_t) |
Acknowledges a particular interrupt, indicating to the hardware that it has been successfully serviced. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_force (const dif_dma_t *dma, dif_dma_irq_t, const bool val) |
Forces a particular interrupt, causing it to be serviced as if hardware had asserted it. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_get_enabled (const dif_dma_t *dma, dif_dma_irq_t, dif_toggle_t *state) |
Checks whether a particular interrupt is currently enabled or disabled. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_set_enabled (const dif_dma_t *dma, dif_dma_irq_t, dif_toggle_t state) |
Sets whether a particular interrupt is currently enabled or disabled. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_disable_all (const dif_dma_t *dma, dif_dma_irq_enable_snapshot_t *snapshot) |
Disables all interrupts, optionally snapshotting all enable states for later restoration. | |
OT_WARN_UNUSED_RESULT dif_result_t | dif_dma_irq_restore_all (const dif_dma_t *dma, const dif_dma_irq_enable_snapshot_t *snapshot) |
Restores interrupts from the given (enable) snapshot. | |
DMA Device Interface Functions
Definition in file dif_dma_autogen.h.
struct dif_dma |
A handle to dma.
This type should be treated as opaque by users.
Definition at line 37 of file dif_dma_autogen.h.
Data Fields | ||
---|---|---|
mmio_region_t | base_addr | The base address for the dma hardware registers. |
dt_dma_t | dt |
The instance, set to kDtDmaCount if not initialized through dif_dma_init_from_dt . |
#define kDifDmaIrqDmaChunkDone kDtDmaIrqDmaChunkDone |
Indicates the transfer of a single chunk has been completed.
Definition at line 138 of file dif_dma_autogen.h.
#define kDifDmaIrqDmaDone kDtDmaIrqDmaDone |
A dma interrupt request type.
DEPRECATED Use dt_dma_irq_t
instead. This enumeration exists solely for the transition to dt-based interrupt numbers and will be removed in the future.
The following are defines to keep the types consistent with DT. DMA operation has been completed.
Definition at line 134 of file dif_dma_autogen.h.
#define kDifDmaIrqDmaError kDtDmaIrqDmaError |
DMA error has occurred.
DMA_STATUS.error_code register shows the details.
Definition at line 142 of file dif_dma_autogen.h.
typedef uint32_t dif_dma_irq_enable_snapshot_t |
A snapshot of the enablement state of the interrupts for this IP.
This is an opaque type, to be used with the dif_dma_irq_disable_all()
and dif_dma_irq_restore_all()
functions.
Definition at line 252 of file dif_dma_autogen.h.
typedef uint32_t dif_dma_irq_state_snapshot_t |
A snapshot of the state of the interrupts for this IP.
This is an opaque type, to be used with the dif_dma_irq_get_state()
and dif_dma_irq_acknowledge_state()
functions.
Definition at line 150 of file dif_dma_autogen.h.
typedef dt_dma_irq_t dif_dma_irq_t |
Definition at line 120 of file dif_dma_autogen.h.
enum dif_dma_alert |
A dma alert type.
Enumerator | |
---|---|
kDifDmaAlertFatalFault | This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected. |
Definition at line 98 of file dif_dma_autogen.h.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_alert_force | ( | const dif_dma_t * | dma, |
dif_dma_alert_t | alert ) |
Forces a particular alert, causing it to be escalated as if the hardware had raised it.
dma | A dma handle. |
alert | The alert to force. |
Definition at line 62 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_get_dt | ( | const dif_dma_t * | dma, |
dt_dma_t * | dt ) |
Get the DT handle from this DIF.
If this DIF was initialized by dif_dma_init_from_dt(dt, ..)
then this function will return dt
. Otherwise it will return an error.
dma | A dma handle. | |
[out] | dt | DT handle. |
kDifBadArg
if the DIF has no DT information, kDifOk
otherwise. Definition at line 52 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_init | ( | mmio_region_t | base_addr, |
dif_dma_t * | dma ) |
Creates a new handle for a(n) dma peripheral.
This function does not actuate the hardware.
base_addr | The MMIO base address of the dma peripheral. | |
[out] | dma | Out param for the initialized handle. |
DEPRECATED This function exists solely for the transition to dt-based DIFs and will be removed in the future.
Definition at line 25 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_init_from_dt | ( | dt_dma_t | dt, |
dif_dma_t * | dma ) |
Creates a new handle for a(n) dma peripheral.
This function does not actuate the hardware.
dt | The devicetable description of the device. | |
[out] | dma | Out param for the initialized handle. |
Definition at line 39 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_acknowledge | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq ) |
Acknowledges a particular interrupt, indicating to the hardware that it has been successfully serviced.
dma | A dma handle. |
irq | An interrupt request. |
Definition at line 217 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_acknowledge_all | ( | const dif_dma_t * | dma | ) |
Acknowledges all interrupts, indicating to the hardware that all interrupts have been successfully serviced.
dma | A dma handle. |
Definition at line 198 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_acknowledge_state | ( | const dif_dma_t * | dma, |
dif_dma_irq_state_snapshot_t | snapshot ) |
Acknowledges all interrupts that were pending at the time of the state snapshot.
dma | A dma handle. |
snapshot | Interrupt state snapshot. |
Definition at line 156 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_disable_all | ( | const dif_dma_t * | dma, |
dif_dma_irq_enable_snapshot_t * | snapshot ) |
Disables all interrupts, optionally snapshotting all enable states for later restoration.
dma | A dma handle. | |
[out] | snapshot | Out-param for the snapshot; may be NULL . |
Definition at line 325 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_force | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq, | ||
const bool | val ) |
Forces a particular interrupt, causing it to be serviced as if hardware had asserted it.
dma | A dma handle. |
irq | An interrupt request. |
val | Value to be set. |
Definition at line 242 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_get_enabled | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq, | ||
dif_toggle_t * | state ) |
Checks whether a particular interrupt is currently enabled or disabled.
dma | A dma handle. | |
irq | An interrupt request. | |
[out] | state | Out-param toggle state of the interrupt. |
Definition at line 267 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_get_state | ( | const dif_dma_t * | dma, |
dif_dma_irq_state_snapshot_t * | snapshot ) |
Returns the state of all interrupts (i.e., pending or not) for this IP.
dma | A dma handle. | |
[out] | snapshot | Out-param for interrupt state snapshot. |
Definition at line 139 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_get_type | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq, | ||
dif_irq_type_t * | type ) |
Returns the type of a given interrupt (i.e., event or status) for this IP.
dma | A dma handle. | |
irq | An interrupt request. | |
[out] | type | Out-param for the interrupt type. |
Definition at line 120 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_is_pending | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq, | ||
bool * | is_pending ) |
Returns whether a particular interrupt is currently pending.
dma | A dma handle. | |
irq | An interrupt request. | |
[out] | is_pending | Out-param for whether the interrupt is pending. |
Definition at line 173 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_restore_all | ( | const dif_dma_t * | dma, |
const dif_dma_irq_enable_snapshot_t * | snapshot ) |
Restores interrupts from the given (enable) snapshot.
dma | A dma handle. |
snapshot | A snapshot to restore from. |
Definition at line 352 of file dif_dma_autogen.c.
OT_WARN_UNUSED_RESULT dif_result_t dif_dma_irq_set_enabled | ( | const dif_dma_t * | dma, |
dif_dma_irq_t | irq, | ||
dif_toggle_t | state ) |
Sets whether a particular interrupt is currently enabled or disabled.
dma | A dma handle. |
irq | An interrupt request. |
state | The new toggle state for the interrupt. |
Definition at line 294 of file dif_dma_autogen.c.