Device Tables (DT) for IP rv_timer and top earlgrey. More...
Go to the source code of this file.
Macros | |
#define | OPENTITAN_RV_TIMER_HAS_RISCV_CSRS_INTEGRATION 1 |
List of supported hardware features. | |
#define | OPENTITAN_RV_TIMER_HAS_ENABLE 1 |
#define | OPENTITAN_RV_TIMER_HAS_DISABLE 1 |
#define | OPENTITAN_RV_TIMER_HAS_INTERRUPT 1 |
#define | OPENTITAN_RV_TIMER_HAS_CONFIG 1 |
#define | OPENTITAN_RV_TIMER_HAS_COUNTER 1 |
#define | OPENTITAN_RV_TIMER_HAS_COMPARE 1 |
Typedefs | |
typedef enum dt_rv_timer | dt_rv_timer_t |
List of instances. | |
typedef enum dt_rv_timer_reg_block | dt_rv_timer_reg_block_t |
List of register blocks. | |
typedef enum dt_rv_timer_irq | dt_rv_timer_irq_t |
List of IRQs. | |
typedef enum dt_rv_timer_alert | dt_rv_timer_alert_t |
List of Alerts. | |
typedef enum dt_rv_timer_clock | dt_rv_timer_clock_t |
List of clock ports. | |
typedef enum dt_rv_timer_reset | dt_rv_timer_reset_t |
List of reset ports. | |
Enumerations | |
enum | dt_rv_timer { kDtRvTimer = 0 , kDtRvTimerFirst = 0 , kDtRvTimerCount = 1 } |
List of instances. More... | |
enum | dt_rv_timer_reg_block { kDtRvTimerRegBlockCore = 0 , kDtRvTimerRegBlockCount = 1 } |
List of register blocks. More... | |
enum | dt_rv_timer_irq { kDtRvTimerIrqTimerExpiredHart0Timer0 = 0 , kDtRvTimerIrqCount = 1 } |
List of IRQs. More... | |
enum | dt_rv_timer_alert { kDtRvTimerAlertFatalFault = 0 , kDtRvTimerAlertCount = 1 } |
List of Alerts. More... | |
enum | dt_rv_timer_clock { kDtRvTimerClockClk = 0 , kDtRvTimerClockCount = 1 } |
List of clock ports. More... | |
enum | dt_rv_timer_reset { kDtRvTimerResetRst = 0 , kDtRvTimerResetCount = 1 } |
List of reset ports. More... | |
Functions | |
dt_rv_timer_t | dt_rv_timer_from_instance_id (dt_instance_id_t inst_id) |
Get the rv_timer instance from an instance ID. | |
dt_instance_id_t | dt_rv_timer_instance_id (dt_rv_timer_t dt) |
Get the instance ID of an instance. | |
uint32_t | dt_rv_timer_reg_block (dt_rv_timer_t dt, dt_rv_timer_reg_block_t reg_block) |
Get the register base address of an instance. | |
dt_plic_irq_id_t | dt_rv_timer_irq_to_plic_id (dt_rv_timer_t dt, dt_rv_timer_irq_t irq) |
Get the PLIC ID of a rv_timer IRQ for a given instance. | |
dt_rv_timer_irq_t | dt_rv_timer_irq_from_plic_id (dt_rv_timer_t dt, dt_plic_irq_id_t irq) |
Convert a global IRQ ID to a local rv_timer IRQ type. | |
dt_alert_id_t | dt_rv_timer_alert_to_alert_id (dt_rv_timer_t dt, dt_rv_timer_alert_t alert) |
Get the alert ID of a rv_timer alert for a given instance. | |
dt_rv_timer_alert_t | dt_rv_timer_alert_from_alert_id (dt_rv_timer_t dt, dt_alert_id_t alert) |
Convert a global alert ID to a local rv_timer alert type. | |
dt_clock_t | dt_rv_timer_clock (dt_rv_timer_t dt, dt_rv_timer_clock_t clk) |
Get the clock signal connected to a clock port of an instance. | |
dt_reset_t | dt_rv_timer_reset (dt_rv_timer_t dt, dt_rv_timer_reset_t rst) |
Get the reset signal connected to a reset port of an instance. | |
Device Tables (DT) for IP rv_timer and top earlgrey.
This file contains the type definitions and global functions of the rv_timer.
Definition in file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_COMPARE 1 |
Definition at line 91 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_CONFIG 1 |
Definition at line 89 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_COUNTER 1 |
Definition at line 90 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_DISABLE 1 |
Definition at line 87 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_ENABLE 1 |
Definition at line 86 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_INTERRUPT 1 |
Definition at line 88 of file dt_rv_timer.h.
#define OPENTITAN_RV_TIMER_HAS_RISCV_CSRS_INTEGRATION 1 |
List of supported hardware features.
Definition at line 85 of file dt_rv_timer.h.
typedef enum dt_rv_timer_alert dt_rv_timer_alert_t |
List of Alerts.
Alerts are guaranteed to be numbered consecutively from 0.
typedef enum dt_rv_timer_clock dt_rv_timer_clock_t |
List of clock ports.
Clock ports are guaranteed to be numbered consecutively from 0.
typedef enum dt_rv_timer_irq dt_rv_timer_irq_t |
List of IRQs.
IRQs are guaranteed to be numbered consecutively from 0.
typedef enum dt_rv_timer_reg_block dt_rv_timer_reg_block_t |
List of register blocks.
Register blocks are guaranteed to start at 0 and to be consecutively numbered.
typedef enum dt_rv_timer_reset dt_rv_timer_reset_t |
List of reset ports.
Reset ports are guaranteed to be numbered consecutively from 0.
enum dt_rv_timer |
enum dt_rv_timer_alert |
List of Alerts.
Alerts are guaranteed to be numbered consecutively from 0.
Enumerator | |
---|---|
kDtRvTimerAlertFatalFault | This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected inside the RV_TIMER unit. |
Definition at line 57 of file dt_rv_timer.h.
enum dt_rv_timer_clock |
List of clock ports.
Clock ports are guaranteed to be numbered consecutively from 0.
Enumerator | |
---|---|
kDtRvTimerClockClk | Clock port clk_i. |
Definition at line 67 of file dt_rv_timer.h.
enum dt_rv_timer_irq |
List of IRQs.
IRQs are guaranteed to be numbered consecutively from 0.
Enumerator | |
---|---|
kDtRvTimerIrqTimerExpiredHart0Timer0 | raised if hart0's timer0 expired (mtimecmp >= mtime) |
Definition at line 47 of file dt_rv_timer.h.
List of register blocks.
Register blocks are guaranteed to start at 0 and to be consecutively numbered.
Definition at line 34 of file dt_rv_timer.h.
enum dt_rv_timer_reset |
List of reset ports.
Reset ports are guaranteed to be numbered consecutively from 0.
Enumerator | |
---|---|
kDtRvTimerResetRst | Reset port rst_ni. |
Definition at line 77 of file dt_rv_timer.h.
dt_rv_timer_alert_t dt_rv_timer_alert_from_alert_id | ( | dt_rv_timer_t | dt, |
dt_alert_id_t | alert ) |
Convert a global alert ID to a local rv_timer alert type.
dt | Instance of rv_timer. |
alert | A global alert ID that belongs to this instance. |
kDtRvTimerAlertCount
.Note: This function assumes that the global alert ID belongs to the instance of rv_timer passed in parameter. In other words, it must be the case that dt_rv_timer_instance_id(dt) == dt_alert_id_to_instance_id(alert)
. Otherwise, this function will return kDtRvTimerAlertCount
.
Definition at line 115 of file dt_rv_timer.c.
dt_alert_id_t dt_rv_timer_alert_to_alert_id | ( | dt_rv_timer_t | dt, |
dt_rv_timer_alert_t | alert ) |
Get the alert ID of a rv_timer alert for a given instance.
Note: This function only makes sense if the instance is connected to the Alert Handler. For any instances where the instance is not connected, the return value is unspecified.
dt | Instance of rv_timer. |
alert | A rv_timer alert. |
Definition at line 109 of file dt_rv_timer.c.
dt_clock_t dt_rv_timer_clock | ( | dt_rv_timer_t | dt, |
dt_rv_timer_clock_t | clk ) |
Get the clock signal connected to a clock port of an instance.
dt | Instance of rv_timer. |
clk | Clock port. |
Definition at line 127 of file dt_rv_timer.c.
dt_rv_timer_t dt_rv_timer_from_instance_id | ( | dt_instance_id_t | inst_id | ) |
Get the rv_timer instance from an instance ID.
For example, dt_uart_from_instance_id(kDtInstanceIdUart3) == kDtUart3
.
inst_id | Instance ID. |
Note: This function only makes sense if the instance ID has device type rv_timer, otherwise the returned value is unspecified.
Definition at line 65 of file dt_rv_timer.c.
dt_instance_id_t dt_rv_timer_instance_id | ( | dt_rv_timer_t | dt | ) |
Get the instance ID of an instance.
dt | Instance of rv_timer. |
Definition at line 72 of file dt_rv_timer.c.
dt_rv_timer_irq_t dt_rv_timer_irq_from_plic_id | ( | dt_rv_timer_t | dt, |
dt_plic_irq_id_t | irq ) |
Convert a global IRQ ID to a local rv_timer IRQ type.
dt | Instance of rv_timer. |
irq | A PLIC ID that belongs to this instance. |
kDtRvTimerIrqCount
.Note: This function assumes that the PLIC ID belongs to the instance of rv_timer passed in parameter. In other words, it must be the case that dt_rv_timer_instance_id(dt) == dt_plic_id_to_instance_id(irq)
. Otherwise, this function will return kDtRvTimerIrqCount
.
Definition at line 94 of file dt_rv_timer.c.
dt_plic_irq_id_t dt_rv_timer_irq_to_plic_id | ( | dt_rv_timer_t | dt, |
dt_rv_timer_irq_t | irq ) |
Get the PLIC ID of a rv_timer IRQ for a given instance.
If the instance is not connected to the PLIC, this function will return kDtPlicIrqIdNone
.
dt | Instance of rv_timer. |
irq | A rv_timer IRQ. |
Definition at line 84 of file dt_rv_timer.c.
uint32_t dt_rv_timer_reg_block | ( | dt_rv_timer_t | dt, |
dt_rv_timer_reg_block_t | reg_block ) |
Get the register base address of an instance.
dt | Instance of rv_timer. |
reg_block | The register block requested. |
Definition at line 77 of file dt_rv_timer.c.
dt_reset_t dt_rv_timer_reset | ( | dt_rv_timer_t | dt, |
dt_rv_timer_reset_t | rst ) |
Get the reset signal connected to a reset port of an instance.
dt | Instance of rv_timer. |
rst | Reset port. |
Definition at line 134 of file dt_rv_timer.c.