spi_host_micron512Mb_flash_test.c

// Copyright lowRISC contributors (OpenTitan project).
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
#include <assert.h>
 
#include "dt/dt_api.h"  // Generated
#include "sw/device/lib/arch/device.h"
#include "sw/device/lib/base/macros.h"
#include "sw/device/lib/base/memory.h"
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_pinmux.h"
#include "sw/device/lib/dif/dif_spi_host.h"
#include "sw/device/lib/runtime/hart.h"
#include "sw/device/lib/runtime/log.h"
#include "sw/device/lib/runtime/print.h"
#include "sw/device/lib/testing/spi_device_testutils.h"
#include "sw/device/lib/testing/spi_flash_testutils.h"
#include "sw/device/lib/testing/spi_host_testutils.h"
#include "sw/device/lib/testing/test_framework/check.h"
#include "sw/device/lib/testing/test_framework/ottf_main.h"
#include "sw/device/tests/spi_host_flash_test_impl.h"
 
#include "hw/top_earlgrey/sw/autogen/top_earlgrey.h"
 
static_assert(__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__,
              "This test assumes the target platform is little endian.");
 
OTTF_DEFINE_TEST_CONFIG();
 
static void init_test(dif_spi_host_t *spi_host) {
  dif_pinmux_t pinmux;
  mmio_region_t base_addr =
      mmio_region_from_addr(TOP_EARLGREY_PINMUX_AON_BASE_ADDR);
  CHECK_DIF_OK(dif_pinmux_init(base_addr, &pinmux));
 
  spi_pinmux_platform_id_t platform_id = kSpiPinmuxPlatformIdCount;
  switch (kDeviceType) {
    case kDeviceSilicon:
      platform_id = kSpiPinmuxPlatformIdTeacup;
      break;
    case kDeviceFpgaCw310:
      platform_id = kSpiPinmuxPlatformIdCw310;
      break;
    case kDeviceFpgaCw340:
      platform_id = kSpiPinmuxPlatformIdCw340;
      break;
    default:
      CHECK(false, "Device not supported %u", kDeviceType);
      break;
  }
  dt_pad_t csb_pad = kDtPadIoc10;
  CHECK_STATUS_OK(
      spi_host1_pinmux_connect_to_bob(&pinmux, csb_pad, platform_id));
 
  base_addr = mmio_region_from_addr(TOP_EARLGREY_SPI_HOST1_BASE_ADDR);
  CHECK_DIF_OK(dif_spi_host_init(base_addr, spi_host));
 
  CHECK(kClockFreqUsbHz <= UINT32_MAX, "kClockFreqUsbHz must fit in uint32_t");
 
  CHECK_DIF_OK(dif_spi_host_configure(
                   spi_host,
                   (dif_spi_host_config_t){
                       .spi_clock = 1000000,
                       .peripheral_clock_freq_hz = (uint32_t)kClockFreqUsbHz,
                   }),
               "SPI_HOST config failed!");
 
  CHECK_DIF_OK(dif_spi_host_output_set_enabled(spi_host, true));
}
 
bool test_main(void) {
  dif_spi_host_t spi_host;
 
  init_test(&spi_host);
 
  /**
   * This flash has bug where it does not report the busy bit on the status
   * register correctly for the quad page program. So we would have to use a non
   * standard method (flag status register). So we won't test quad test program
   * here.
   */
  enum MicronVendorSpecific {
    kManufacturerId = 0x20,
  };
 
  status_t result = OK_STATUS();
  EXECUTE_TEST(result, test_software_reset, &spi_host);
  EXECUTE_TEST(result, test_read_sfdp, &spi_host);
  EXECUTE_TEST(result, test_sector_erase, &spi_host);
  EXECUTE_TEST(result, test_read_jedec, &spi_host, kManufacturerId);
  EXECUTE_TEST(result, test_enable_quad_mode, &spi_host);
  EXECUTE_TEST(result, test_page_program, &spi_host);
  if (is_4_bytes_address_mode_supported()) {
    EXECUTE_TEST(result, test_4bytes_address, &spi_host);
  }
  EXECUTE_TEST(result, test_fast_read, &spi_host);
  EXECUTE_TEST(result, test_dual_read, &spi_host);
  EXECUTE_TEST(result, test_quad_read, &spi_host);
  EXECUTE_TEST(result, test_erase_32k_block, &spi_host);
  EXECUTE_TEST(result, test_erase_64k_block, &spi_host);
 
  return status_ok(result);
}