Registers

Summary

Name	Offset	Length	Description
pinmux.`ALERT_TEST`	0x0	4	Alert Test Register
pinmux.`MIO_PERIPH_INSEL_REGWEN_0`	0x4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_1`	0x8	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_2`	0xc	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_3`	0x10	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_4`	0x14	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_5`	0x18	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_6`	0x1c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_7`	0x20	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_8`	0x24	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_9`	0x28	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_10`	0x2c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_11`	0x30	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_12`	0x34	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_13`	0x38	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_14`	0x3c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_15`	0x40	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_16`	0x44	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_17`	0x48	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_18`	0x4c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_19`	0x50	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_20`	0x54	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_21`	0x58	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_22`	0x5c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_23`	0x60	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_24`	0x64	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_25`	0x68	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_26`	0x6c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_27`	0x70	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_28`	0x74	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_29`	0x78	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_30`	0x7c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_31`	0x80	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_32`	0x84	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_33`	0x88	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_34`	0x8c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_35`	0x90	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_36`	0x94	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_37`	0x98	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_38`	0x9c	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_39`	0xa0	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_40`	0xa4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_41`	0xa8	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_42`	0xac	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_43`	0xb0	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_44`	0xb4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_45`	0xb8	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_46`	0xbc	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_47`	0xc0	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_48`	0xc4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_49`	0xc8	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_50`	0xcc	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_51`	0xd0	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_52`	0xd4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_53`	0xd8	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_54`	0xdc	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_55`	0xe0	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_REGWEN_56`	0xe4	4	Register write enable for MIO peripheral input selects.
pinmux.`MIO_PERIPH_INSEL_0`	0xe8	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_1`	0xec	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_2`	0xf0	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_3`	0xf4	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_4`	0xf8	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_5`	0xfc	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_6`	0x100	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_7`	0x104	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_8`	0x108	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_9`	0x10c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_10`	0x110	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_11`	0x114	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_12`	0x118	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_13`	0x11c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_14`	0x120	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_15`	0x124	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_16`	0x128	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_17`	0x12c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_18`	0x130	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_19`	0x134	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_20`	0x138	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_21`	0x13c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_22`	0x140	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_23`	0x144	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_24`	0x148	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_25`	0x14c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_26`	0x150	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_27`	0x154	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_28`	0x158	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_29`	0x15c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_30`	0x160	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_31`	0x164	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_32`	0x168	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_33`	0x16c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_34`	0x170	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_35`	0x174	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_36`	0x178	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_37`	0x17c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_38`	0x180	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_39`	0x184	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_40`	0x188	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_41`	0x18c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_42`	0x190	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_43`	0x194	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_44`	0x198	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_45`	0x19c	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_46`	0x1a0	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_47`	0x1a4	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_48`	0x1a8	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_49`	0x1ac	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_50`	0x1b0	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_51`	0x1b4	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_52`	0x1b8	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_53`	0x1bc	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_54`	0x1c0	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_55`	0x1c4	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_PERIPH_INSEL_56`	0x1c8	4	For each peripheral input, this selects the muxable pad input.
pinmux.`MIO_OUTSEL_REGWEN_0`	0x1cc	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_1`	0x1d0	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_2`	0x1d4	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_3`	0x1d8	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_4`	0x1dc	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_5`	0x1e0	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_6`	0x1e4	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_7`	0x1e8	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_8`	0x1ec	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_9`	0x1f0	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_10`	0x1f4	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_11`	0x1f8	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_12`	0x1fc	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_13`	0x200	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_14`	0x204	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_15`	0x208	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_16`	0x20c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_17`	0x210	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_18`	0x214	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_19`	0x218	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_20`	0x21c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_21`	0x220	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_22`	0x224	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_23`	0x228	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_24`	0x22c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_25`	0x230	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_26`	0x234	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_27`	0x238	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_28`	0x23c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_29`	0x240	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_30`	0x244	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_31`	0x248	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_32`	0x24c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_33`	0x250	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_34`	0x254	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_35`	0x258	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_36`	0x25c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_37`	0x260	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_38`	0x264	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_39`	0x268	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_40`	0x26c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_41`	0x270	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_42`	0x274	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_43`	0x278	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_44`	0x27c	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_45`	0x280	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_REGWEN_46`	0x284	4	Register write enable for MIO output selects.
pinmux.`MIO_OUTSEL_0`	0x288	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_1`	0x28c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_2`	0x290	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_3`	0x294	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_4`	0x298	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_5`	0x29c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_6`	0x2a0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_7`	0x2a4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_8`	0x2a8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_9`	0x2ac	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_10`	0x2b0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_11`	0x2b4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_12`	0x2b8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_13`	0x2bc	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_14`	0x2c0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_15`	0x2c4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_16`	0x2c8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_17`	0x2cc	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_18`	0x2d0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_19`	0x2d4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_20`	0x2d8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_21`	0x2dc	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_22`	0x2e0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_23`	0x2e4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_24`	0x2e8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_25`	0x2ec	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_26`	0x2f0	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_27`	0x2f4	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_28`	0x2f8	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_29`	0x2fc	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_30`	0x300	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_31`	0x304	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_32`	0x308	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_33`	0x30c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_34`	0x310	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_35`	0x314	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_36`	0x318	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_37`	0x31c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_38`	0x320	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_39`	0x324	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_40`	0x328	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_41`	0x32c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_42`	0x330	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_43`	0x334	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_44`	0x338	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_45`	0x33c	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_OUTSEL_46`	0x340	4	For each muxable pad, this selects the peripheral output.
pinmux.`MIO_PAD_ATTR_REGWEN_0`	0x344	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_1`	0x348	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_2`	0x34c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_3`	0x350	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_4`	0x354	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_5`	0x358	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_6`	0x35c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_7`	0x360	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_8`	0x364	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_9`	0x368	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_10`	0x36c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_11`	0x370	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_12`	0x374	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_13`	0x378	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_14`	0x37c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_15`	0x380	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_16`	0x384	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_17`	0x388	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_18`	0x38c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_19`	0x390	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_20`	0x394	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_21`	0x398	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_22`	0x39c	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_23`	0x3a0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_24`	0x3a4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_25`	0x3a8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_26`	0x3ac	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_27`	0x3b0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_28`	0x3b4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_29`	0x3b8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_30`	0x3bc	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_31`	0x3c0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_32`	0x3c4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_33`	0x3c8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_34`	0x3cc	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_35`	0x3d0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_36`	0x3d4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_37`	0x3d8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_38`	0x3dc	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_39`	0x3e0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_40`	0x3e4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_41`	0x3e8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_42`	0x3ec	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_43`	0x3f0	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_44`	0x3f4	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_45`	0x3f8	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_REGWEN_46`	0x3fc	4	Register write enable for MIO PAD attributes.
pinmux.`MIO_PAD_ATTR_0`	0x400	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_1`	0x404	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_2`	0x408	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_3`	0x40c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_4`	0x410	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_5`	0x414	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_6`	0x418	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_7`	0x41c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_8`	0x420	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_9`	0x424	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_10`	0x428	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_11`	0x42c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_12`	0x430	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_13`	0x434	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_14`	0x438	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_15`	0x43c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_16`	0x440	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_17`	0x444	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_18`	0x448	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_19`	0x44c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_20`	0x450	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_21`	0x454	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_22`	0x458	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_23`	0x45c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_24`	0x460	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_25`	0x464	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_26`	0x468	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_27`	0x46c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_28`	0x470	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_29`	0x474	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_30`	0x478	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_31`	0x47c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_32`	0x480	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_33`	0x484	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_34`	0x488	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_35`	0x48c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_36`	0x490	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_37`	0x494	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_38`	0x498	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_39`	0x49c	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_40`	0x4a0	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_41`	0x4a4	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_42`	0x4a8	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_43`	0x4ac	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_44`	0x4b0	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_45`	0x4b4	4	Muxed pad attributes.
pinmux.`MIO_PAD_ATTR_46`	0x4b8	4	Muxed pad attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_0`	0x4bc	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_1`	0x4c0	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_2`	0x4c4	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_3`	0x4c8	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_4`	0x4cc	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_5`	0x4d0	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_6`	0x4d4	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_7`	0x4d8	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_8`	0x4dc	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_9`	0x4e0	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_10`	0x4e4	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_11`	0x4e8	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_12`	0x4ec	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_13`	0x4f0	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_14`	0x4f4	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_REGWEN_15`	0x4f8	4	Register write enable for DIO PAD attributes.
pinmux.`DIO_PAD_ATTR_0`	0x4fc	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_1`	0x500	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_2`	0x504	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_3`	0x508	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_4`	0x50c	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_5`	0x510	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_6`	0x514	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_7`	0x518	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_8`	0x51c	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_9`	0x520	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_10`	0x524	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_11`	0x528	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_12`	0x52c	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_13`	0x530	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_14`	0x534	4	Dedicated pad attributes.
pinmux.`DIO_PAD_ATTR_15`	0x538	4	Dedicated pad attributes.
pinmux.`MIO_PAD_SLEEP_STATUS_0`	0x53c	4	Register indicating whether the corresponding pad is in sleep mode.
pinmux.`MIO_PAD_SLEEP_STATUS_1`	0x540	4	Register indicating whether the corresponding pad is in sleep mode.
pinmux.`MIO_PAD_SLEEP_REGWEN_0`	0x544	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_1`	0x548	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_2`	0x54c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_3`	0x550	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_4`	0x554	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_5`	0x558	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_6`	0x55c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_7`	0x560	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_8`	0x564	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_9`	0x568	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_10`	0x56c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_11`	0x570	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_12`	0x574	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_13`	0x578	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_14`	0x57c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_15`	0x580	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_16`	0x584	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_17`	0x588	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_18`	0x58c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_19`	0x590	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_20`	0x594	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_21`	0x598	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_22`	0x59c	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_23`	0x5a0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_24`	0x5a4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_25`	0x5a8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_26`	0x5ac	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_27`	0x5b0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_28`	0x5b4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_29`	0x5b8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_30`	0x5bc	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_31`	0x5c0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_32`	0x5c4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_33`	0x5c8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_34`	0x5cc	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_35`	0x5d0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_36`	0x5d4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_37`	0x5d8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_38`	0x5dc	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_39`	0x5e0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_40`	0x5e4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_41`	0x5e8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_42`	0x5ec	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_43`	0x5f0	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_44`	0x5f4	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_45`	0x5f8	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_REGWEN_46`	0x5fc	4	Register write enable for MIO sleep value configuration.
pinmux.`MIO_PAD_SLEEP_EN_0`	0x600	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_1`	0x604	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_2`	0x608	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_3`	0x60c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_4`	0x610	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_5`	0x614	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_6`	0x618	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_7`	0x61c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_8`	0x620	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_9`	0x624	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_10`	0x628	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_11`	0x62c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_12`	0x630	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_13`	0x634	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_14`	0x638	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_15`	0x63c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_16`	0x640	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_17`	0x644	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_18`	0x648	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_19`	0x64c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_20`	0x650	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_21`	0x654	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_22`	0x658	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_23`	0x65c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_24`	0x660	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_25`	0x664	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_26`	0x668	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_27`	0x66c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_28`	0x670	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_29`	0x674	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_30`	0x678	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_31`	0x67c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_32`	0x680	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_33`	0x684	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_34`	0x688	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_35`	0x68c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_36`	0x690	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_37`	0x694	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_38`	0x698	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_39`	0x69c	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_40`	0x6a0	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_41`	0x6a4	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_42`	0x6a8	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_43`	0x6ac	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_44`	0x6b0	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_45`	0x6b4	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_EN_46`	0x6b8	4	Enables the sleep mode of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_0`	0x6bc	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_1`	0x6c0	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_2`	0x6c4	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_3`	0x6c8	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_4`	0x6cc	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_5`	0x6d0	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_6`	0x6d4	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_7`	0x6d8	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_8`	0x6dc	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_9`	0x6e0	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_10`	0x6e4	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_11`	0x6e8	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_12`	0x6ec	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_13`	0x6f0	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_14`	0x6f4	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_15`	0x6f8	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_16`	0x6fc	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_17`	0x700	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_18`	0x704	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_19`	0x708	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_20`	0x70c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_21`	0x710	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_22`	0x714	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_23`	0x718	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_24`	0x71c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_25`	0x720	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_26`	0x724	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_27`	0x728	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_28`	0x72c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_29`	0x730	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_30`	0x734	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_31`	0x738	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_32`	0x73c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_33`	0x740	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_34`	0x744	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_35`	0x748	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_36`	0x74c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_37`	0x750	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_38`	0x754	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_39`	0x758	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_40`	0x75c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_41`	0x760	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_42`	0x764	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_43`	0x768	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_44`	0x76c	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_45`	0x770	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`MIO_PAD_SLEEP_MODE_46`	0x774	4	Defines sleep behavior of the corresponding muxed pad.
pinmux.`DIO_PAD_SLEEP_STATUS`	0x778	4	Register indicating whether the corresponding pad is in sleep mode.
pinmux.`DIO_PAD_SLEEP_REGWEN_0`	0x77c	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_1`	0x780	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_2`	0x784	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_3`	0x788	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_4`	0x78c	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_5`	0x790	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_6`	0x794	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_7`	0x798	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_8`	0x79c	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_9`	0x7a0	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_10`	0x7a4	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_11`	0x7a8	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_12`	0x7ac	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_13`	0x7b0	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_14`	0x7b4	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_REGWEN_15`	0x7b8	4	Register write enable for DIO sleep value configuration.
pinmux.`DIO_PAD_SLEEP_EN_0`	0x7bc	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_1`	0x7c0	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_2`	0x7c4	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_3`	0x7c8	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_4`	0x7cc	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_5`	0x7d0	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_6`	0x7d4	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_7`	0x7d8	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_8`	0x7dc	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_9`	0x7e0	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_10`	0x7e4	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_11`	0x7e8	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_12`	0x7ec	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_13`	0x7f0	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_14`	0x7f4	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_EN_15`	0x7f8	4	Enables the sleep mode of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_0`	0x7fc	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_1`	0x800	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_2`	0x804	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_3`	0x808	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_4`	0x80c	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_5`	0x810	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_6`	0x814	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_7`	0x818	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_8`	0x81c	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_9`	0x820	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_10`	0x824	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_11`	0x828	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_12`	0x82c	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_13`	0x830	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_14`	0x834	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`DIO_PAD_SLEEP_MODE_15`	0x838	4	Defines sleep behavior of the corresponding dedicated pad.
pinmux.`WKUP_DETECTOR_REGWEN_0`	0x83c	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_1`	0x840	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_2`	0x844	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_3`	0x848	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_4`	0x84c	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_5`	0x850	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_6`	0x854	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_REGWEN_7`	0x858	4	Register write enable for wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_0`	0x85c	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_1`	0x860	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_2`	0x864	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_3`	0x868	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_4`	0x86c	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_5`	0x870	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_6`	0x874	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_EN_7`	0x878	4	Enables for the wakeup detectors.
pinmux.`WKUP_DETECTOR_0`	0x87c	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_1`	0x880	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_2`	0x884	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_3`	0x888	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_4`	0x88c	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_5`	0x890	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_6`	0x894	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_7`	0x898	4	Configuration of wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_0`	0x89c	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_1`	0x8a0	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_2`	0x8a4	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_3`	0x8a8	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_4`	0x8ac	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_5`	0x8b0	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_6`	0x8b4	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_CNT_TH_7`	0x8b8	4	Counter thresholds for wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_0`	0x8bc	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_1`	0x8c0	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_2`	0x8c4	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_3`	0x8c8	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_4`	0x8cc	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_5`	0x8d0	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_6`	0x8d4	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_DETECTOR_PADSEL_7`	0x8d8	4	Pad selects for pad wakeup condition detectors.
pinmux.`WKUP_CAUSE`	0x8dc	4	Cause registers for wakeup detectors.

ALERT_TEST

Alert Test Register

Offset: 0x0
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "fatal_fault", "bits": 1, "attr": ["wo"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 130}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	wo	0x0	fatal_fault	Write 1 to trigger one alert event of this kind.

MIO_PERIPH_INSEL_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
MIO_PERIPH_INSEL_REGWEN_0	0x4
MIO_PERIPH_INSEL_REGWEN_1	0x8
MIO_PERIPH_INSEL_REGWEN_2	0xc
MIO_PERIPH_INSEL_REGWEN_3	0x10
MIO_PERIPH_INSEL_REGWEN_4	0x14
MIO_PERIPH_INSEL_REGWEN_5	0x18
MIO_PERIPH_INSEL_REGWEN_6	0x1c
MIO_PERIPH_INSEL_REGWEN_7	0x20
MIO_PERIPH_INSEL_REGWEN_8	0x24
MIO_PERIPH_INSEL_REGWEN_9	0x28
MIO_PERIPH_INSEL_REGWEN_10	0x2c
MIO_PERIPH_INSEL_REGWEN_11	0x30
MIO_PERIPH_INSEL_REGWEN_12	0x34
MIO_PERIPH_INSEL_REGWEN_13	0x38
MIO_PERIPH_INSEL_REGWEN_14	0x3c
MIO_PERIPH_INSEL_REGWEN_15	0x40
MIO_PERIPH_INSEL_REGWEN_16	0x44
MIO_PERIPH_INSEL_REGWEN_17	0x48
MIO_PERIPH_INSEL_REGWEN_18	0x4c
MIO_PERIPH_INSEL_REGWEN_19	0x50
MIO_PERIPH_INSEL_REGWEN_20	0x54
MIO_PERIPH_INSEL_REGWEN_21	0x58
MIO_PERIPH_INSEL_REGWEN_22	0x5c
MIO_PERIPH_INSEL_REGWEN_23	0x60
MIO_PERIPH_INSEL_REGWEN_24	0x64
MIO_PERIPH_INSEL_REGWEN_25	0x68
MIO_PERIPH_INSEL_REGWEN_26	0x6c
MIO_PERIPH_INSEL_REGWEN_27	0x70
MIO_PERIPH_INSEL_REGWEN_28	0x74
MIO_PERIPH_INSEL_REGWEN_29	0x78
MIO_PERIPH_INSEL_REGWEN_30	0x7c
MIO_PERIPH_INSEL_REGWEN_31	0x80
MIO_PERIPH_INSEL_REGWEN_32	0x84
MIO_PERIPH_INSEL_REGWEN_33	0x88
MIO_PERIPH_INSEL_REGWEN_34	0x8c
MIO_PERIPH_INSEL_REGWEN_35	0x90
MIO_PERIPH_INSEL_REGWEN_36	0x94
MIO_PERIPH_INSEL_REGWEN_37	0x98
MIO_PERIPH_INSEL_REGWEN_38	0x9c
MIO_PERIPH_INSEL_REGWEN_39	0xa0
MIO_PERIPH_INSEL_REGWEN_40	0xa4
MIO_PERIPH_INSEL_REGWEN_41	0xa8
MIO_PERIPH_INSEL_REGWEN_42	0xac
MIO_PERIPH_INSEL_REGWEN_43	0xb0
MIO_PERIPH_INSEL_REGWEN_44	0xb4
MIO_PERIPH_INSEL_REGWEN_45	0xb8
MIO_PERIPH_INSEL_REGWEN_46	0xbc
MIO_PERIPH_INSEL_REGWEN_47	0xc0
MIO_PERIPH_INSEL_REGWEN_48	0xc4
MIO_PERIPH_INSEL_REGWEN_49	0xc8
MIO_PERIPH_INSEL_REGWEN_50	0xcc
MIO_PERIPH_INSEL_REGWEN_51	0xd0
MIO_PERIPH_INSEL_REGWEN_52	0xd4
MIO_PERIPH_INSEL_REGWEN_53	0xd8
MIO_PERIPH_INSEL_REGWEN_54	0xdc
MIO_PERIPH_INSEL_REGWEN_55	0xe0
MIO_PERIPH_INSEL_REGWEN_56	0xe4

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding MIO_PERIPH_INSEL is not writable anymore.

MIO_PERIPH_INSEL

For each peripheral input, this selects the muxable pad input.

Reset default: 0x0
Reset mask: 0x3f

Instances

Name	Offset
MIO_PERIPH_INSEL_0	0xe8
MIO_PERIPH_INSEL_1	0xec
MIO_PERIPH_INSEL_2	0xf0
MIO_PERIPH_INSEL_3	0xf4
MIO_PERIPH_INSEL_4	0xf8
MIO_PERIPH_INSEL_5	0xfc
MIO_PERIPH_INSEL_6	0x100
MIO_PERIPH_INSEL_7	0x104
MIO_PERIPH_INSEL_8	0x108
MIO_PERIPH_INSEL_9	0x10c
MIO_PERIPH_INSEL_10	0x110
MIO_PERIPH_INSEL_11	0x114
MIO_PERIPH_INSEL_12	0x118
MIO_PERIPH_INSEL_13	0x11c
MIO_PERIPH_INSEL_14	0x120
MIO_PERIPH_INSEL_15	0x124
MIO_PERIPH_INSEL_16	0x128
MIO_PERIPH_INSEL_17	0x12c
MIO_PERIPH_INSEL_18	0x130
MIO_PERIPH_INSEL_19	0x134
MIO_PERIPH_INSEL_20	0x138
MIO_PERIPH_INSEL_21	0x13c
MIO_PERIPH_INSEL_22	0x140
MIO_PERIPH_INSEL_23	0x144
MIO_PERIPH_INSEL_24	0x148
MIO_PERIPH_INSEL_25	0x14c
MIO_PERIPH_INSEL_26	0x150
MIO_PERIPH_INSEL_27	0x154
MIO_PERIPH_INSEL_28	0x158
MIO_PERIPH_INSEL_29	0x15c
MIO_PERIPH_INSEL_30	0x160
MIO_PERIPH_INSEL_31	0x164
MIO_PERIPH_INSEL_32	0x168
MIO_PERIPH_INSEL_33	0x16c
MIO_PERIPH_INSEL_34	0x170
MIO_PERIPH_INSEL_35	0x174
MIO_PERIPH_INSEL_36	0x178
MIO_PERIPH_INSEL_37	0x17c
MIO_PERIPH_INSEL_38	0x180
MIO_PERIPH_INSEL_39	0x184
MIO_PERIPH_INSEL_40	0x188
MIO_PERIPH_INSEL_41	0x18c
MIO_PERIPH_INSEL_42	0x190
MIO_PERIPH_INSEL_43	0x194
MIO_PERIPH_INSEL_44	0x198
MIO_PERIPH_INSEL_45	0x19c
MIO_PERIPH_INSEL_46	0x1a0
MIO_PERIPH_INSEL_47	0x1a4
MIO_PERIPH_INSEL_48	0x1a8
MIO_PERIPH_INSEL_49	0x1ac
MIO_PERIPH_INSEL_50	0x1b0
MIO_PERIPH_INSEL_51	0x1b4
MIO_PERIPH_INSEL_52	0x1b8
MIO_PERIPH_INSEL_53	0x1bc
MIO_PERIPH_INSEL_54	0x1c0
MIO_PERIPH_INSEL_55	0x1c4
MIO_PERIPH_INSEL_56	0x1c8

Fields

{"reg": [{"name": "IN", "bits": 6, "attr": ["rw"], "rotate": 0}, {"bits": 26}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:6				Reserved
5:0	rw	0x0	IN	0: tie constantly to zero, 1: tie constantly to 1, >=2: MIO pads (i.e., add 2 to the native MIO pad index).

MIO_OUTSEL_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
MIO_OUTSEL_REGWEN_0	0x1cc
MIO_OUTSEL_REGWEN_1	0x1d0
MIO_OUTSEL_REGWEN_2	0x1d4
MIO_OUTSEL_REGWEN_3	0x1d8
MIO_OUTSEL_REGWEN_4	0x1dc
MIO_OUTSEL_REGWEN_5	0x1e0
MIO_OUTSEL_REGWEN_6	0x1e4
MIO_OUTSEL_REGWEN_7	0x1e8
MIO_OUTSEL_REGWEN_8	0x1ec
MIO_OUTSEL_REGWEN_9	0x1f0
MIO_OUTSEL_REGWEN_10	0x1f4
MIO_OUTSEL_REGWEN_11	0x1f8
MIO_OUTSEL_REGWEN_12	0x1fc
MIO_OUTSEL_REGWEN_13	0x200
MIO_OUTSEL_REGWEN_14	0x204
MIO_OUTSEL_REGWEN_15	0x208
MIO_OUTSEL_REGWEN_16	0x20c
MIO_OUTSEL_REGWEN_17	0x210
MIO_OUTSEL_REGWEN_18	0x214
MIO_OUTSEL_REGWEN_19	0x218
MIO_OUTSEL_REGWEN_20	0x21c
MIO_OUTSEL_REGWEN_21	0x220
MIO_OUTSEL_REGWEN_22	0x224
MIO_OUTSEL_REGWEN_23	0x228
MIO_OUTSEL_REGWEN_24	0x22c
MIO_OUTSEL_REGWEN_25	0x230
MIO_OUTSEL_REGWEN_26	0x234
MIO_OUTSEL_REGWEN_27	0x238
MIO_OUTSEL_REGWEN_28	0x23c
MIO_OUTSEL_REGWEN_29	0x240
MIO_OUTSEL_REGWEN_30	0x244
MIO_OUTSEL_REGWEN_31	0x248
MIO_OUTSEL_REGWEN_32	0x24c
MIO_OUTSEL_REGWEN_33	0x250
MIO_OUTSEL_REGWEN_34	0x254
MIO_OUTSEL_REGWEN_35	0x258
MIO_OUTSEL_REGWEN_36	0x25c
MIO_OUTSEL_REGWEN_37	0x260
MIO_OUTSEL_REGWEN_38	0x264
MIO_OUTSEL_REGWEN_39	0x268
MIO_OUTSEL_REGWEN_40	0x26c
MIO_OUTSEL_REGWEN_41	0x270
MIO_OUTSEL_REGWEN_42	0x274
MIO_OUTSEL_REGWEN_43	0x278
MIO_OUTSEL_REGWEN_44	0x27c
MIO_OUTSEL_REGWEN_45	0x280
MIO_OUTSEL_REGWEN_46	0x284

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding MIO_OUTSEL is not writable anymore.

MIO_OUTSEL

For each muxable pad, this selects the peripheral output.

Reset default: 0x2
Reset mask: 0x7f

Instances

Name	Offset
MIO_OUTSEL_0	0x288
MIO_OUTSEL_1	0x28c
MIO_OUTSEL_2	0x290
MIO_OUTSEL_3	0x294
MIO_OUTSEL_4	0x298
MIO_OUTSEL_5	0x29c
MIO_OUTSEL_6	0x2a0
MIO_OUTSEL_7	0x2a4
MIO_OUTSEL_8	0x2a8
MIO_OUTSEL_9	0x2ac
MIO_OUTSEL_10	0x2b0
MIO_OUTSEL_11	0x2b4
MIO_OUTSEL_12	0x2b8
MIO_OUTSEL_13	0x2bc
MIO_OUTSEL_14	0x2c0
MIO_OUTSEL_15	0x2c4
MIO_OUTSEL_16	0x2c8
MIO_OUTSEL_17	0x2cc
MIO_OUTSEL_18	0x2d0
MIO_OUTSEL_19	0x2d4
MIO_OUTSEL_20	0x2d8
MIO_OUTSEL_21	0x2dc
MIO_OUTSEL_22	0x2e0
MIO_OUTSEL_23	0x2e4
MIO_OUTSEL_24	0x2e8
MIO_OUTSEL_25	0x2ec
MIO_OUTSEL_26	0x2f0
MIO_OUTSEL_27	0x2f4
MIO_OUTSEL_28	0x2f8
MIO_OUTSEL_29	0x2fc
MIO_OUTSEL_30	0x300
MIO_OUTSEL_31	0x304
MIO_OUTSEL_32	0x308
MIO_OUTSEL_33	0x30c
MIO_OUTSEL_34	0x310
MIO_OUTSEL_35	0x314
MIO_OUTSEL_36	0x318
MIO_OUTSEL_37	0x31c
MIO_OUTSEL_38	0x320
MIO_OUTSEL_39	0x324
MIO_OUTSEL_40	0x328
MIO_OUTSEL_41	0x32c
MIO_OUTSEL_42	0x330
MIO_OUTSEL_43	0x334
MIO_OUTSEL_44	0x338
MIO_OUTSEL_45	0x33c
MIO_OUTSEL_46	0x340

Fields

{"reg": [{"name": "OUT", "bits": 7, "attr": ["rw"], "rotate": 0}, {"bits": 25}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:7				Reserved
6:0	rw	0x2	OUT	0: tie constantly to zero, 1: tie constantly to 1, 2: high-Z, >=3: peripheral outputs (i.e., add 3 to the native peripheral pad index).

MIO_PAD_ATTR_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
MIO_PAD_ATTR_REGWEN_0	0x344
MIO_PAD_ATTR_REGWEN_1	0x348
MIO_PAD_ATTR_REGWEN_2	0x34c
MIO_PAD_ATTR_REGWEN_3	0x350
MIO_PAD_ATTR_REGWEN_4	0x354
MIO_PAD_ATTR_REGWEN_5	0x358
MIO_PAD_ATTR_REGWEN_6	0x35c
MIO_PAD_ATTR_REGWEN_7	0x360
MIO_PAD_ATTR_REGWEN_8	0x364
MIO_PAD_ATTR_REGWEN_9	0x368
MIO_PAD_ATTR_REGWEN_10	0x36c
MIO_PAD_ATTR_REGWEN_11	0x370
MIO_PAD_ATTR_REGWEN_12	0x374
MIO_PAD_ATTR_REGWEN_13	0x378
MIO_PAD_ATTR_REGWEN_14	0x37c
MIO_PAD_ATTR_REGWEN_15	0x380
MIO_PAD_ATTR_REGWEN_16	0x384
MIO_PAD_ATTR_REGWEN_17	0x388
MIO_PAD_ATTR_REGWEN_18	0x38c
MIO_PAD_ATTR_REGWEN_19	0x390
MIO_PAD_ATTR_REGWEN_20	0x394
MIO_PAD_ATTR_REGWEN_21	0x398
MIO_PAD_ATTR_REGWEN_22	0x39c
MIO_PAD_ATTR_REGWEN_23	0x3a0
MIO_PAD_ATTR_REGWEN_24	0x3a4
MIO_PAD_ATTR_REGWEN_25	0x3a8
MIO_PAD_ATTR_REGWEN_26	0x3ac
MIO_PAD_ATTR_REGWEN_27	0x3b0
MIO_PAD_ATTR_REGWEN_28	0x3b4
MIO_PAD_ATTR_REGWEN_29	0x3b8
MIO_PAD_ATTR_REGWEN_30	0x3bc
MIO_PAD_ATTR_REGWEN_31	0x3c0
MIO_PAD_ATTR_REGWEN_32	0x3c4
MIO_PAD_ATTR_REGWEN_33	0x3c8
MIO_PAD_ATTR_REGWEN_34	0x3cc
MIO_PAD_ATTR_REGWEN_35	0x3d0
MIO_PAD_ATTR_REGWEN_36	0x3d4
MIO_PAD_ATTR_REGWEN_37	0x3d8
MIO_PAD_ATTR_REGWEN_38	0x3dc
MIO_PAD_ATTR_REGWEN_39	0x3e0
MIO_PAD_ATTR_REGWEN_40	0x3e4
MIO_PAD_ATTR_REGWEN_41	0x3e8
MIO_PAD_ATTR_REGWEN_42	0x3ec
MIO_PAD_ATTR_REGWEN_43	0x3f0
MIO_PAD_ATTR_REGWEN_44	0x3f4
MIO_PAD_ATTR_REGWEN_45	0x3f8
MIO_PAD_ATTR_REGWEN_46	0x3fc

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding `MIO_PAD_ATTR` is not writable anymore.

Muxed pad attributes. This register has WARL behavior since not each pad type may support all attributes. The muxed pad that is used for TAP strap 0 has a different reset value, with pull_en set to 1.

Reset default: 0x0
Reset mask: 0xf300ff

Instances

Name	Offset
MIO_PAD_ATTR_0	0x400
MIO_PAD_ATTR_1	0x404
MIO_PAD_ATTR_2	0x408
MIO_PAD_ATTR_3	0x40c
MIO_PAD_ATTR_4	0x410
MIO_PAD_ATTR_5	0x414
MIO_PAD_ATTR_6	0x418
MIO_PAD_ATTR_7	0x41c
MIO_PAD_ATTR_8	0x420
MIO_PAD_ATTR_9	0x424
MIO_PAD_ATTR_10	0x428
MIO_PAD_ATTR_11	0x42c
MIO_PAD_ATTR_12	0x430
MIO_PAD_ATTR_13	0x434
MIO_PAD_ATTR_14	0x438
MIO_PAD_ATTR_15	0x43c
MIO_PAD_ATTR_16	0x440
MIO_PAD_ATTR_17	0x444
MIO_PAD_ATTR_18	0x448
MIO_PAD_ATTR_19	0x44c
MIO_PAD_ATTR_20	0x450
MIO_PAD_ATTR_21	0x454
MIO_PAD_ATTR_22	0x458
MIO_PAD_ATTR_23	0x45c
MIO_PAD_ATTR_24	0x460
MIO_PAD_ATTR_25	0x464
MIO_PAD_ATTR_26	0x468
MIO_PAD_ATTR_27	0x46c
MIO_PAD_ATTR_28	0x470
MIO_PAD_ATTR_29	0x474
MIO_PAD_ATTR_30	0x478
MIO_PAD_ATTR_31	0x47c
MIO_PAD_ATTR_32	0x480
MIO_PAD_ATTR_33	0x484
MIO_PAD_ATTR_34	0x488
MIO_PAD_ATTR_35	0x48c
MIO_PAD_ATTR_36	0x490
MIO_PAD_ATTR_37	0x494
MIO_PAD_ATTR_38	0x498
MIO_PAD_ATTR_39	0x49c
MIO_PAD_ATTR_40	0x4a0
MIO_PAD_ATTR_41	0x4a4
MIO_PAD_ATTR_42	0x4a8
MIO_PAD_ATTR_43	0x4ac
MIO_PAD_ATTR_44	0x4b0
MIO_PAD_ATTR_45	0x4b4
MIO_PAD_ATTR_46	0x4b8

Fields

{"reg": [{"name": "invert", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "virtual_od_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "pull_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "pull_select", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "keeper_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "schmitt_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "od_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "input_disable", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 8}, {"name": "slew_rate", "bits": 2, "attr": ["rw"], "rotate": -90}, {"bits": 2}, {"name": "drive_strength", "bits": 4, "attr": ["rw"], "rotate": -90}, {"bits": 8}], "config": {"lanes": 1, "fontsize": 10, "vspace": 160}}

Bits	Type	Reset	Name
31:24			Reserved
23:20	rw	0x0	drive_strength
19:18			Reserved
17:16	rw	0x0	slew_rate
15:8			Reserved
7	rw	0x0	input_disable
6	rw	0x0	od_en
5	rw	0x0	schmitt_en
4	rw	0x0	keeper_en
3	rw	0x0	pull_select
2	rw	0x0	pull_en
1	rw	0x0	virtual_od_en
0	rw	0x0	invert

MIO_PAD_ATTR . drive_strength

Drive strength (0x0: weakest, 0xf: strongest)

MIO_PAD_ATTR . slew_rate

Slew rate (0x0: slowest, 0x3: fastest).

MIO_PAD_ATTR . input_disable

Disable input drivers. Setting this to 1 for pads that are not used as input can reduce their leakage current.

MIO_PAD_ATTR . od_en

Enable open drain.

MIO_PAD_ATTR . schmitt_en

Enable the schmitt trigger.

MIO_PAD_ATTR . keeper_en

Enable keeper termination. This weakly drives the previous pad output value when output is disabled, similar to a verilog trireg.

MIO_PAD_ATTR . pull_select

Pull select (0: pull-down, 1: pull-up).

Value	Name	Description
0x0	pull_down	Select the pull-down resistor.
0x1	pull_up	Select the pull-up resistor.

MIO_PAD_ATTR . pull_en

Enable pull-up or pull-down resistor.

MIO_PAD_ATTR . virtual_od_en

Enable virtual open drain.

MIO_PAD_ATTR . invert

Invert input and output levels.

DIO_PAD_ATTR_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
DIO_PAD_ATTR_REGWEN_0	0x4bc
DIO_PAD_ATTR_REGWEN_1	0x4c0
DIO_PAD_ATTR_REGWEN_2	0x4c4
DIO_PAD_ATTR_REGWEN_3	0x4c8
DIO_PAD_ATTR_REGWEN_4	0x4cc
DIO_PAD_ATTR_REGWEN_5	0x4d0
DIO_PAD_ATTR_REGWEN_6	0x4d4
DIO_PAD_ATTR_REGWEN_7	0x4d8
DIO_PAD_ATTR_REGWEN_8	0x4dc
DIO_PAD_ATTR_REGWEN_9	0x4e0
DIO_PAD_ATTR_REGWEN_10	0x4e4
DIO_PAD_ATTR_REGWEN_11	0x4e8
DIO_PAD_ATTR_REGWEN_12	0x4ec
DIO_PAD_ATTR_REGWEN_13	0x4f0
DIO_PAD_ATTR_REGWEN_14	0x4f4
DIO_PAD_ATTR_REGWEN_15	0x4f8

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding `DIO_PAD_ATTR` is not writable anymore.

DIO_PAD_ATTR

Dedicated pad attributes. This register has WARL behavior since not each pad type may support all attributes.

Reset default: 0x0
Reset mask: 0xf300ff

Instances

Name	Offset
DIO_PAD_ATTR_0	0x4fc
DIO_PAD_ATTR_1	0x500
DIO_PAD_ATTR_2	0x504
DIO_PAD_ATTR_3	0x508
DIO_PAD_ATTR_4	0x50c
DIO_PAD_ATTR_5	0x510
DIO_PAD_ATTR_6	0x514
DIO_PAD_ATTR_7	0x518
DIO_PAD_ATTR_8	0x51c
DIO_PAD_ATTR_9	0x520
DIO_PAD_ATTR_10	0x524
DIO_PAD_ATTR_11	0x528
DIO_PAD_ATTR_12	0x52c
DIO_PAD_ATTR_13	0x530
DIO_PAD_ATTR_14	0x534
DIO_PAD_ATTR_15	0x538

Fields

{"reg": [{"name": "invert", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "virtual_od_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "pull_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "pull_select", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "keeper_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "schmitt_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "od_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "input_disable", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 8}, {"name": "slew_rate", "bits": 2, "attr": ["rw"], "rotate": -90}, {"bits": 2}, {"name": "drive_strength", "bits": 4, "attr": ["rw"], "rotate": -90}, {"bits": 8}], "config": {"lanes": 1, "fontsize": 10, "vspace": 160}}

Bits	Type	Reset	Name
31:24			Reserved
23:20	rw	0x0	drive_strength
19:18			Reserved
17:16	rw	0x0	slew_rate
15:8			Reserved
7	rw	0x0	input_disable
6	rw	0x0	od_en
5	rw	0x0	schmitt_en
4	rw	0x0	keeper_en
3	rw	0x0	pull_select
2	rw	0x0	pull_en
1	rw	0x0	virtual_od_en
0	rw	0x0	invert

DIO_PAD_ATTR . drive_strength

Drive strength (0x0: weakest, 0xf: strongest)

DIO_PAD_ATTR . slew_rate

Slew rate (0x0: slowest, 0x3: fastest).

DIO_PAD_ATTR . input_disable

Disable input drivers. Setting this to 1 for pads that are not used as input can reduce their leakage current.

DIO_PAD_ATTR . od_en

Enable open drain.

DIO_PAD_ATTR . schmitt_en

Enable the schmitt trigger.

DIO_PAD_ATTR . keeper_en

Enable keeper termination. This weakly drives the previous pad output value when output is disabled, similar to a verilog trireg.

DIO_PAD_ATTR . pull_select

Pull select (0: pull-down, 1: pull-up).

Value	Name	Description
0x0	pull_down	Select the pull-down resistor.
0x1	pull_up	Select the pull-up resistor.

DIO_PAD_ATTR . pull_en

Enable pull-up or pull-down resistor.

DIO_PAD_ATTR . virtual_od_en

Enable virtual open drain.

DIO_PAD_ATTR . invert

Invert input and output levels.

MIO_PAD_SLEEP_STATUS_0

Offset: 0x53c
Reset default: 0x0
Reset mask: 0xffffffff

Fields

{"reg": [{"name": "EN_0", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_1", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_2", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_3", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_4", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_5", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_6", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_7", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_8", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_9", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_10", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_11", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_12", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_13", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_14", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_15", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_16", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_17", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_18", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_19", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_20", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_21", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_22", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_23", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_24", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_25", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_26", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_27", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_28", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_29", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_30", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_31", "bits": 1, "attr": ["rw0c"], "rotate": -90}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31	rw0c	0x0	EN_31	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
30	rw0c	0x0	EN_30	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
29	rw0c	0x0	EN_29	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
28	rw0c	0x0	EN_28	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
27	rw0c	0x0	EN_27	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
26	rw0c	0x0	EN_26	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
25	rw0c	0x0	EN_25	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
24	rw0c	0x0	EN_24	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
23	rw0c	0x0	EN_23	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
22	rw0c	0x0	EN_22	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
21	rw0c	0x0	EN_21	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
20	rw0c	0x0	EN_20	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
19	rw0c	0x0	EN_19	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
18	rw0c	0x0	EN_18	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
17	rw0c	0x0	EN_17	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
16	rw0c	0x0	EN_16	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
15	rw0c	0x0	EN_15	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
14	rw0c	0x0	EN_14	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
13	rw0c	0x0	EN_13	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
12	rw0c	0x0	EN_12	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
11	rw0c	0x0	EN_11	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
10	rw0c	0x0	EN_10	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
9	rw0c	0x0	EN_9	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
8	rw0c	0x0	EN_8	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
7	rw0c	0x0	EN_7	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
6	rw0c	0x0	EN_6	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
5	rw0c	0x0	EN_5	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
4	rw0c	0x0	EN_4	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
3	rw0c	0x0	EN_3	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
2	rw0c	0x0	EN_2	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
1	rw0c	0x0	EN_1	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
0	rw0c	0x0	EN_0	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`MIO_PAD_SLEEP_EN`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.

MIO_PAD_SLEEP_STATUS_1

Offset: 0x540
Reset default: 0x0
Reset mask: 0x7fff

Fields

{"reg": [{"name": "EN_32", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_33", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_34", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_35", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_36", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_37", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_38", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_39", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_40", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_41", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_42", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_43", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_44", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_45", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_46", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 17}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:15				Reserved
14	rw0c	0x0	EN_46	For MIO_PAD1
13	rw0c	0x0	EN_45	For MIO_PAD1
12	rw0c	0x0	EN_44	For MIO_PAD1
11	rw0c	0x0	EN_43	For MIO_PAD1
10	rw0c	0x0	EN_42	For MIO_PAD1
9	rw0c	0x0	EN_41	For MIO_PAD1
8	rw0c	0x0	EN_40	For MIO_PAD1
7	rw0c	0x0	EN_39	For MIO_PAD1
6	rw0c	0x0	EN_38	For MIO_PAD1
5	rw0c	0x0	EN_37	For MIO_PAD1
4	rw0c	0x0	EN_36	For MIO_PAD1
3	rw0c	0x0	EN_35	For MIO_PAD1
2	rw0c	0x0	EN_34	For MIO_PAD1
1	rw0c	0x0	EN_33	For MIO_PAD1
0	rw0c	0x0	EN_32	For MIO_PAD1

MIO_PAD_SLEEP_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
MIO_PAD_SLEEP_REGWEN_0	0x544
MIO_PAD_SLEEP_REGWEN_1	0x548
MIO_PAD_SLEEP_REGWEN_2	0x54c
MIO_PAD_SLEEP_REGWEN_3	0x550
MIO_PAD_SLEEP_REGWEN_4	0x554
MIO_PAD_SLEEP_REGWEN_5	0x558
MIO_PAD_SLEEP_REGWEN_6	0x55c
MIO_PAD_SLEEP_REGWEN_7	0x560
MIO_PAD_SLEEP_REGWEN_8	0x564
MIO_PAD_SLEEP_REGWEN_9	0x568
MIO_PAD_SLEEP_REGWEN_10	0x56c
MIO_PAD_SLEEP_REGWEN_11	0x570
MIO_PAD_SLEEP_REGWEN_12	0x574
MIO_PAD_SLEEP_REGWEN_13	0x578
MIO_PAD_SLEEP_REGWEN_14	0x57c
MIO_PAD_SLEEP_REGWEN_15	0x580
MIO_PAD_SLEEP_REGWEN_16	0x584
MIO_PAD_SLEEP_REGWEN_17	0x588
MIO_PAD_SLEEP_REGWEN_18	0x58c
MIO_PAD_SLEEP_REGWEN_19	0x590
MIO_PAD_SLEEP_REGWEN_20	0x594
MIO_PAD_SLEEP_REGWEN_21	0x598
MIO_PAD_SLEEP_REGWEN_22	0x59c
MIO_PAD_SLEEP_REGWEN_23	0x5a0
MIO_PAD_SLEEP_REGWEN_24	0x5a4
MIO_PAD_SLEEP_REGWEN_25	0x5a8
MIO_PAD_SLEEP_REGWEN_26	0x5ac
MIO_PAD_SLEEP_REGWEN_27	0x5b0
MIO_PAD_SLEEP_REGWEN_28	0x5b4
MIO_PAD_SLEEP_REGWEN_29	0x5b8
MIO_PAD_SLEEP_REGWEN_30	0x5bc
MIO_PAD_SLEEP_REGWEN_31	0x5c0
MIO_PAD_SLEEP_REGWEN_32	0x5c4
MIO_PAD_SLEEP_REGWEN_33	0x5c8
MIO_PAD_SLEEP_REGWEN_34	0x5cc
MIO_PAD_SLEEP_REGWEN_35	0x5d0
MIO_PAD_SLEEP_REGWEN_36	0x5d4
MIO_PAD_SLEEP_REGWEN_37	0x5d8
MIO_PAD_SLEEP_REGWEN_38	0x5dc
MIO_PAD_SLEEP_REGWEN_39	0x5e0
MIO_PAD_SLEEP_REGWEN_40	0x5e4
MIO_PAD_SLEEP_REGWEN_41	0x5e8
MIO_PAD_SLEEP_REGWEN_42	0x5ec
MIO_PAD_SLEEP_REGWEN_43	0x5f0
MIO_PAD_SLEEP_REGWEN_44	0x5f4
MIO_PAD_SLEEP_REGWEN_45	0x5f8
MIO_PAD_SLEEP_REGWEN_46	0x5fc

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding `MIO_PAD_SLEEP_MODE` is not writable anymore.

MIO_PAD_SLEEP_EN

Enables the sleep mode of the corresponding muxed pad.

Reset default: 0x0
Reset mask: 0x1

Instances

Name	Offset
MIO_PAD_SLEEP_EN_0	0x600
MIO_PAD_SLEEP_EN_1	0x604
MIO_PAD_SLEEP_EN_2	0x608
MIO_PAD_SLEEP_EN_3	0x60c
MIO_PAD_SLEEP_EN_4	0x610
MIO_PAD_SLEEP_EN_5	0x614
MIO_PAD_SLEEP_EN_6	0x618
MIO_PAD_SLEEP_EN_7	0x61c
MIO_PAD_SLEEP_EN_8	0x620
MIO_PAD_SLEEP_EN_9	0x624
MIO_PAD_SLEEP_EN_10	0x628
MIO_PAD_SLEEP_EN_11	0x62c
MIO_PAD_SLEEP_EN_12	0x630
MIO_PAD_SLEEP_EN_13	0x634
MIO_PAD_SLEEP_EN_14	0x638
MIO_PAD_SLEEP_EN_15	0x63c
MIO_PAD_SLEEP_EN_16	0x640
MIO_PAD_SLEEP_EN_17	0x644
MIO_PAD_SLEEP_EN_18	0x648
MIO_PAD_SLEEP_EN_19	0x64c
MIO_PAD_SLEEP_EN_20	0x650
MIO_PAD_SLEEP_EN_21	0x654
MIO_PAD_SLEEP_EN_22	0x658
MIO_PAD_SLEEP_EN_23	0x65c
MIO_PAD_SLEEP_EN_24	0x660
MIO_PAD_SLEEP_EN_25	0x664
MIO_PAD_SLEEP_EN_26	0x668
MIO_PAD_SLEEP_EN_27	0x66c
MIO_PAD_SLEEP_EN_28	0x670
MIO_PAD_SLEEP_EN_29	0x674
MIO_PAD_SLEEP_EN_30	0x678
MIO_PAD_SLEEP_EN_31	0x67c
MIO_PAD_SLEEP_EN_32	0x680
MIO_PAD_SLEEP_EN_33	0x684
MIO_PAD_SLEEP_EN_34	0x688
MIO_PAD_SLEEP_EN_35	0x68c
MIO_PAD_SLEEP_EN_36	0x690
MIO_PAD_SLEEP_EN_37	0x694
MIO_PAD_SLEEP_EN_38	0x698
MIO_PAD_SLEEP_EN_39	0x69c
MIO_PAD_SLEEP_EN_40	0x6a0
MIO_PAD_SLEEP_EN_41	0x6a4
MIO_PAD_SLEEP_EN_42	0x6a8
MIO_PAD_SLEEP_EN_43	0x6ac
MIO_PAD_SLEEP_EN_44	0x6b0
MIO_PAD_SLEEP_EN_45	0x6b4
MIO_PAD_SLEEP_EN_46	0x6b8

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:1			Reserved
0	rw	0x0	EN

MIO_PAD_SLEEP_EN . EN

Deep sleep mode enable. If this bit is set to 1 the corresponding pad will enable the sleep behavior specified in MIO_PAD_SLEEP_MODE upon deep sleep entry, and the corresponding bit in MIO_PAD_SLEEP_STATUS will be set to 1. The pad remains in deep sleep mode until the corresponding bit in MIO_PAD_SLEEP_STATUS is cleared by SW. Note that if an always on peripheral is connected to a specific MIO pad, the corresponding MIO_PAD_SLEEP_EN bit should be set to 0.

MIO_PAD_SLEEP_MODE

Defines sleep behavior of the corresponding muxed pad.

Reset default: 0x2
Reset mask: 0x3

Instances

Name	Offset
MIO_PAD_SLEEP_MODE_0	0x6bc
MIO_PAD_SLEEP_MODE_1	0x6c0
MIO_PAD_SLEEP_MODE_2	0x6c4
MIO_PAD_SLEEP_MODE_3	0x6c8
MIO_PAD_SLEEP_MODE_4	0x6cc
MIO_PAD_SLEEP_MODE_5	0x6d0
MIO_PAD_SLEEP_MODE_6	0x6d4
MIO_PAD_SLEEP_MODE_7	0x6d8
MIO_PAD_SLEEP_MODE_8	0x6dc
MIO_PAD_SLEEP_MODE_9	0x6e0
MIO_PAD_SLEEP_MODE_10	0x6e4
MIO_PAD_SLEEP_MODE_11	0x6e8
MIO_PAD_SLEEP_MODE_12	0x6ec
MIO_PAD_SLEEP_MODE_13	0x6f0
MIO_PAD_SLEEP_MODE_14	0x6f4
MIO_PAD_SLEEP_MODE_15	0x6f8
MIO_PAD_SLEEP_MODE_16	0x6fc
MIO_PAD_SLEEP_MODE_17	0x700
MIO_PAD_SLEEP_MODE_18	0x704
MIO_PAD_SLEEP_MODE_19	0x708
MIO_PAD_SLEEP_MODE_20	0x70c
MIO_PAD_SLEEP_MODE_21	0x710
MIO_PAD_SLEEP_MODE_22	0x714
MIO_PAD_SLEEP_MODE_23	0x718
MIO_PAD_SLEEP_MODE_24	0x71c
MIO_PAD_SLEEP_MODE_25	0x720
MIO_PAD_SLEEP_MODE_26	0x724
MIO_PAD_SLEEP_MODE_27	0x728
MIO_PAD_SLEEP_MODE_28	0x72c
MIO_PAD_SLEEP_MODE_29	0x730
MIO_PAD_SLEEP_MODE_30	0x734
MIO_PAD_SLEEP_MODE_31	0x738
MIO_PAD_SLEEP_MODE_32	0x73c
MIO_PAD_SLEEP_MODE_33	0x740
MIO_PAD_SLEEP_MODE_34	0x744
MIO_PAD_SLEEP_MODE_35	0x748
MIO_PAD_SLEEP_MODE_36	0x74c
MIO_PAD_SLEEP_MODE_37	0x750
MIO_PAD_SLEEP_MODE_38	0x754
MIO_PAD_SLEEP_MODE_39	0x758
MIO_PAD_SLEEP_MODE_40	0x75c
MIO_PAD_SLEEP_MODE_41	0x760
MIO_PAD_SLEEP_MODE_42	0x764
MIO_PAD_SLEEP_MODE_43	0x768
MIO_PAD_SLEEP_MODE_44	0x76c
MIO_PAD_SLEEP_MODE_45	0x770
MIO_PAD_SLEEP_MODE_46	0x774

Fields

{"reg": [{"name": "OUT", "bits": 2, "attr": ["rw"], "rotate": -90}, {"bits": 30}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:2			Reserved
1:0	rw	0x2	OUT

MIO_PAD_SLEEP_MODE . OUT

Value to drive in deep sleep.

Value	Name	Description
0x0	Tie-Low	The pad is driven actively to zero in deep sleep mode.
0x1	Tie-High	The pad is driven actively to one in deep sleep mode.
0x2	High-Z	The pad is left undriven in deep sleep mode. Note that the actual driving behavior during deep sleep will then depend on the pull-up/-down configuration of in !!MIO_PAD_ATTR.
0x3	Keep	Keep last driven value (including high-Z).

DIO_PAD_SLEEP_STATUS

Offset: 0x778
Reset default: 0x0
Reset mask: 0xffff

Fields

{"reg": [{"name": "EN_0", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_1", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_2", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_3", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_4", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_5", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_6", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_7", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_8", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_9", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_10", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_11", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_12", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_13", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_14", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "EN_15", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 16}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:16				Reserved
15	rw0c	0x0	EN_15	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
14	rw0c	0x0	EN_14	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
13	rw0c	0x0	EN_13	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
12	rw0c	0x0	EN_12	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
11	rw0c	0x0	EN_11	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
10	rw0c	0x0	EN_10	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
9	rw0c	0x0	EN_9	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
8	rw0c	0x0	EN_8	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
7	rw0c	0x0	EN_7	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
6	rw0c	0x0	EN_6	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
5	rw0c	0x0	EN_5	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
4	rw0c	0x0	EN_4	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
3	rw0c	0x0	EN_3	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
2	rw0c	0x0	EN_2	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
1	rw0c	0x0	EN_1	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.
0	rw0c	0x0	EN_0	This register is set to 1 if the deep sleep mode of the corresponding pad has been enabled (`DIO_PAD_SLEEP_MODE`) upon deep sleep entry. The sleep mode of the corresponding pad will remain active until SW clears this bit.

DIO_PAD_SLEEP_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
DIO_PAD_SLEEP_REGWEN_0	0x77c
DIO_PAD_SLEEP_REGWEN_1	0x780
DIO_PAD_SLEEP_REGWEN_2	0x784
DIO_PAD_SLEEP_REGWEN_3	0x788
DIO_PAD_SLEEP_REGWEN_4	0x78c
DIO_PAD_SLEEP_REGWEN_5	0x790
DIO_PAD_SLEEP_REGWEN_6	0x794
DIO_PAD_SLEEP_REGWEN_7	0x798
DIO_PAD_SLEEP_REGWEN_8	0x79c
DIO_PAD_SLEEP_REGWEN_9	0x7a0
DIO_PAD_SLEEP_REGWEN_10	0x7a4
DIO_PAD_SLEEP_REGWEN_11	0x7a8
DIO_PAD_SLEEP_REGWEN_12	0x7ac
DIO_PAD_SLEEP_REGWEN_13	0x7b0
DIO_PAD_SLEEP_REGWEN_14	0x7b4
DIO_PAD_SLEEP_REGWEN_15	0x7b8

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding `DIO_PAD_SLEEP_MODE` is not writable anymore.

DIO_PAD_SLEEP_EN

Enables the sleep mode of the corresponding dedicated pad.

Reset default: 0x0
Reset mask: 0x1

Instances

Name	Offset
DIO_PAD_SLEEP_EN_0	0x7bc
DIO_PAD_SLEEP_EN_1	0x7c0
DIO_PAD_SLEEP_EN_2	0x7c4
DIO_PAD_SLEEP_EN_3	0x7c8
DIO_PAD_SLEEP_EN_4	0x7cc
DIO_PAD_SLEEP_EN_5	0x7d0
DIO_PAD_SLEEP_EN_6	0x7d4
DIO_PAD_SLEEP_EN_7	0x7d8
DIO_PAD_SLEEP_EN_8	0x7dc
DIO_PAD_SLEEP_EN_9	0x7e0
DIO_PAD_SLEEP_EN_10	0x7e4
DIO_PAD_SLEEP_EN_11	0x7e8
DIO_PAD_SLEEP_EN_12	0x7ec
DIO_PAD_SLEEP_EN_13	0x7f0
DIO_PAD_SLEEP_EN_14	0x7f4
DIO_PAD_SLEEP_EN_15	0x7f8

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:1			Reserved
0	rw	0x0	EN

DIO_PAD_SLEEP_EN . EN

Deep sleep mode enable. If this bit is set to 1 the corresponding pad will enable the sleep behavior specified in DIO_PAD_SLEEP_MODE upon deep sleep entry, and the corresponding bit in DIO_PAD_SLEEP_STATUS will be set to 1. The pad remains in deep sleep mode until the corresponding bit in DIO_PAD_SLEEP_STATUS is cleared by SW. Note that if an always on peripheral is connected to a specific DIO pad, the corresponding DIO_PAD_SLEEP_EN bit should be set to 0.

DIO_PAD_SLEEP_MODE

Defines sleep behavior of the corresponding dedicated pad.

Reset default: 0x2
Reset mask: 0x3

Instances

Name	Offset
DIO_PAD_SLEEP_MODE_0	0x7fc
DIO_PAD_SLEEP_MODE_1	0x800
DIO_PAD_SLEEP_MODE_2	0x804
DIO_PAD_SLEEP_MODE_3	0x808
DIO_PAD_SLEEP_MODE_4	0x80c
DIO_PAD_SLEEP_MODE_5	0x810
DIO_PAD_SLEEP_MODE_6	0x814
DIO_PAD_SLEEP_MODE_7	0x818
DIO_PAD_SLEEP_MODE_8	0x81c
DIO_PAD_SLEEP_MODE_9	0x820
DIO_PAD_SLEEP_MODE_10	0x824
DIO_PAD_SLEEP_MODE_11	0x828
DIO_PAD_SLEEP_MODE_12	0x82c
DIO_PAD_SLEEP_MODE_13	0x830
DIO_PAD_SLEEP_MODE_14	0x834
DIO_PAD_SLEEP_MODE_15	0x838

Fields

{"reg": [{"name": "OUT", "bits": 2, "attr": ["rw"], "rotate": -90}, {"bits": 30}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:2			Reserved
1:0	rw	0x2	OUT

DIO_PAD_SLEEP_MODE . OUT

Value to drive in deep sleep.

Value	Name	Description
0x0	Tie-Low	The pad is driven actively to zero in deep sleep mode.
0x1	Tie-High	The pad is driven actively to one in deep sleep mode.
0x2	High-Z	The pad is left undriven in deep sleep mode. Note that the actual driving behavior during deep sleep will then depend on the pull-up/-down configuration of in !!DIO_PAD_ATTR.
0x3	Keep	Keep last driven value (including high-Z).

WKUP_DETECTOR_REGWEN

Reset default: 0x1
Reset mask: 0x1

Instances

Name	Offset
WKUP_DETECTOR_REGWEN_0	0x83c
WKUP_DETECTOR_REGWEN_1	0x840
WKUP_DETECTOR_REGWEN_2	0x844
WKUP_DETECTOR_REGWEN_3	0x848
WKUP_DETECTOR_REGWEN_4	0x84c
WKUP_DETECTOR_REGWEN_5	0x850
WKUP_DETECTOR_REGWEN_6	0x854
WKUP_DETECTOR_REGWEN_7	0x858

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw0c	0x1	EN	Register write enable bit. If this is cleared to 0, the corresponding WKUP_DETECTOR configuration is not writable anymore.

WKUP_DETECTOR_EN

Enables for the wakeup detectors. Note that these registers are synced to the always-on clock. The first write access always completes immediately. However, read/write accesses following a write will block until that write has completed.

Reset default: 0x0
Reset mask: 0x1

Instances

Name	Offset
WKUP_DETECTOR_EN_0	0x85c
WKUP_DETECTOR_EN_1	0x860
WKUP_DETECTOR_EN_2	0x864
WKUP_DETECTOR_EN_3	0x868
WKUP_DETECTOR_EN_4	0x86c
WKUP_DETECTOR_EN_5	0x870
WKUP_DETECTOR_EN_6	0x874
WKUP_DETECTOR_EN_7	0x878

Fields

{"reg": [{"name": "EN", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw	0x0	EN	Setting this bit activates the corresponding wakeup detector. The behavior is as specified in `WKUP_DETECTOR`, `WKUP_DETECTOR_CNT_TH` and `WKUP_DETECTOR_PADSEL.`

WKUP_DETECTOR

Configuration of wakeup condition detectors. Note that these registers are synced to the always-on clock. The first write access always completes immediately. However, read/write accesses following a write will block until that write has completed.

Note that the wkup detector should be disabled by setting WKUP_DETECTOR_EN_0 before changing the detection mode. The reason for that is that the pulse width counter is NOT cleared upon a mode change while the detector is enabled.

Reset default: 0x0
Reset mask: 0x1f

Instances

Name	Offset
WKUP_DETECTOR_0	0x87c
WKUP_DETECTOR_1	0x880
WKUP_DETECTOR_2	0x884
WKUP_DETECTOR_3	0x888
WKUP_DETECTOR_4	0x88c
WKUP_DETECTOR_5	0x890
WKUP_DETECTOR_6	0x894
WKUP_DETECTOR_7	0x898

Fields

{"reg": [{"name": "MODE", "bits": 3, "attr": ["rw"], "rotate": 0}, {"name": "FILTER", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "MIODIO", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 27}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:5			Reserved
4	rw	0x0	MIODIO
3	rw	0x0	FILTER
2:0	rw	0x0	MODE

WKUP_DETECTOR . MIODIO

0: select index WKUP_DETECTOR_PADSEL from MIO pads, 1: select index WKUP_DETECTOR_PADSEL from DIO pads.

WKUP_DETECTOR . FILTER

0: signal filter disabled, 1: signal filter enabled. the signal must be stable for 4 always-on clock cycles before the value is being forwarded. can be used for debouncing.

WKUP_DETECTOR . MODE

Wakeup detection mode. Out of range values default to Posedge.

Value	Name	Description
0x0	Posedge	Trigger a wakeup request when observing a positive edge.
0x1	Negedge	Trigger a wakeup request when observing a negative edge.
0x2	Edge	Trigger a wakeup request when observing an edge in any direction.
0x3	TimedHigh	Trigger a wakeup request when pin is driven HIGH for a certain amount of always-on clock cycles as configured in !!WKUP_DETECTOR_CNT_TH.
0x4	TimedLow	Trigger a wakeup request when pin is driven LOW for a certain amount of always-on clock cycles as configured in !!WKUP_DETECTOR_CNT_TH.

Other values are reserved.

WKUP_DETECTOR_CNT_TH

Counter thresholds for wakeup condition detectors. Note that these registers are synced to the always-on clock. The first write access always completes immediately. However, read/write accesses following a write will block until that write has completed.

Reset default: 0x0
Reset mask: 0xff

Instances

Name	Offset
WKUP_DETECTOR_CNT_TH_0	0x89c
WKUP_DETECTOR_CNT_TH_1	0x8a0
WKUP_DETECTOR_CNT_TH_2	0x8a4
WKUP_DETECTOR_CNT_TH_3	0x8a8
WKUP_DETECTOR_CNT_TH_4	0x8ac
WKUP_DETECTOR_CNT_TH_5	0x8b0
WKUP_DETECTOR_CNT_TH_6	0x8b4
WKUP_DETECTOR_CNT_TH_7	0x8b8

Fields

{"reg": [{"name": "TH", "bits": 8, "attr": ["rw"], "rotate": 0}, {"bits": 24}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:8				Reserved
7:0	rw	0x0	TH	Counter threshold for TimedLow and TimedHigh wakeup detector modes (see `WKUP_DETECTOR`). The threshold is in terms of always-on clock cycles.

WKUP_DETECTOR_PADSEL

Pad selects for pad wakeup condition detectors. This register is NOT synced to the AON domain since the muxing mechanism is implemented in the same way as the pinmux muxing matrix.

Reset default: 0x0
Reset mask: 0x3f

Instances

Name	Offset
WKUP_DETECTOR_PADSEL_0	0x8bc
WKUP_DETECTOR_PADSEL_1	0x8c0
WKUP_DETECTOR_PADSEL_2	0x8c4
WKUP_DETECTOR_PADSEL_3	0x8c8
WKUP_DETECTOR_PADSEL_4	0x8cc
WKUP_DETECTOR_PADSEL_5	0x8d0
WKUP_DETECTOR_PADSEL_6	0x8d4
WKUP_DETECTOR_PADSEL_7	0x8d8

Fields

{"reg": [{"name": "SEL", "bits": 6, "attr": ["rw"], "rotate": 0}, {"bits": 26}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name
31:6			Reserved
5:0	rw	0x0	SEL

WKUP_DETECTOR_PADSEL . SEL

Selects a specific MIO or DIO pad (depending on WKUP_DETECTOR configuration). In case of MIO, the pad select index is the same as used for MIO_PERIPH_INSEL, meaning that index 0 and 1 just select constants 0 and 1, and the MIO pads live at indices >= 2. In case of DIO pads, the pad select index corresponds 1:1 to the DIO pad to be selected.

WKUP_CAUSE

Cause registers for wakeup detectors. Note that these registers are synced to the always-on clock. The first write access always completes immediately. However, read/write accesses following a write will block until that write has completed.

Offset: 0x8dc
Reset default: 0x0
Reset mask: 0xff

Fields

{"reg": [{"name": "CAUSE_0", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_1", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_2", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_3", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_4", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_5", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_6", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"name": "CAUSE_7", "bits": 1, "attr": ["rw0c"], "rotate": -90}, {"bits": 24}], "config": {"lanes": 1, "fontsize": 10, "vspace": 90}}

Bits	Type	Reset	Name	Description
31:8				Reserved
7	rw0c	0x0	CAUSE_7	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
6	rw0c	0x0	CAUSE_6	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
5	rw0c	0x0	CAUSE_5	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
4	rw0c	0x0	CAUSE_4	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
3	rw0c	0x0	CAUSE_3	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
2	rw0c	0x0	CAUSE_2	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
1	rw0c	0x0	CAUSE_1	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.
0	rw0c	0x0	CAUSE_0	Set to 1 if the corresponding detector has detected a wakeup pattern. Write 0 to clear.