pwrmgr_regs.h

Go to the documentation of this file.

/**
 * @file
 * @brief Generated register defines for pwrmgr
 */
 
// Copyright information found in source file:
// Copyright lowRISC contributors (OpenTitan project).
 
// Licensing information found in source file:
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
 
#ifndef _PWRMGR_REG_DEFS_
#define _PWRMGR_REG_DEFS_
 
#ifdef __cplusplus
extern "C" {
#endif
// Number of wakeups
#define PWRMGR_PARAM_NUM_WKUPS 3
 
// Vector index for pinmux pin_wkup_req, applies for WAKEUP_EN, WAKE_STATUS
// and WAKE_INFO
#define PWRMGR_PARAM_PINMUX_PIN_WKUP_REQ_IDX 0
 
// Vector index for pinmux usb_wkup_req, applies for WAKEUP_EN, WAKE_STATUS
// and WAKE_INFO
#define PWRMGR_PARAM_PINMUX_USB_WKUP_REQ_IDX 1
 
// Vector index for aon_timer wkup_req, applies for WAKEUP_EN, WAKE_STATUS
// and WAKE_INFO
#define PWRMGR_PARAM_AON_TIMER_WKUP_REQ_IDX 2
 
// Number of peripheral reset requets
#define PWRMGR_PARAM_NUM_RST_REQS 1
 
// Number of pwrmgr internal reset requets
#define PWRMGR_PARAM_NUM_INT_RST_REQS 2
 
// Number of debug reset requets
#define PWRMGR_PARAM_NUM_DEBUG_RST_REQS 1
 
// Number of inputs from ROM_CTRL
#define PWRMGR_PARAM_NUM_ROM_INPUTS 1
 
// Reset req idx for MainPwr
#define PWRMGR_PARAM_RESET_MAIN_PWR_IDX 1
 
// Reset req idx for Esc
#define PWRMGR_PARAM_RESET_ESC_IDX 2
 
// Reset req idx for Ndm
#define PWRMGR_PARAM_RESET_NDM_IDX 3
 
// Number of alerts
#define PWRMGR_PARAM_NUM_ALERTS 1
 
// Register width
#define PWRMGR_PARAM_REG_WIDTH 32
 
// Common Interrupt Offsets
#define PWRMGR_INTR_COMMON_WAKEUP_BIT 0
 
// Interrupt State Register
#define PWRMGR_INTR_STATE_REG_OFFSET 0x0
#define PWRMGR_INTR_STATE_REG_RESVAL 0x0u
#define PWRMGR_INTR_STATE_WAKEUP_BIT 0
 
// Interrupt Enable Register
#define PWRMGR_INTR_ENABLE_REG_OFFSET 0x4
#define PWRMGR_INTR_ENABLE_REG_RESVAL 0x0u
#define PWRMGR_INTR_ENABLE_WAKEUP_BIT 0
 
// Interrupt Test Register
#define PWRMGR_INTR_TEST_REG_OFFSET 0x8
#define PWRMGR_INTR_TEST_REG_RESVAL 0x0u
#define PWRMGR_INTR_TEST_WAKEUP_BIT 0
 
// Alert Test Register
#define PWRMGR_ALERT_TEST_REG_OFFSET 0xc
#define PWRMGR_ALERT_TEST_REG_RESVAL 0x80000000u
#define PWRMGR_ALERT_TEST_FATAL_FAULT_BIT 0
#define PWRMGR_ALERT_TEST_REGWEN_BIT 31
 
// Controls the configurability of the !!CONTROL register.
#define PWRMGR_CTRL_CFG_REGWEN_REG_OFFSET 0x10
#define PWRMGR_CTRL_CFG_REGWEN_REG_RESVAL 0x1u
#define PWRMGR_CTRL_CFG_REGWEN_EN_BIT 0
 
// Control register
#define PWRMGR_CONTROL_REG_OFFSET 0x14
#define PWRMGR_CONTROL_REG_RESVAL 0x180u
#define PWRMGR_CONTROL_LOW_POWER_HINT_BIT 0
#define PWRMGR_CONTROL_LOW_POWER_HINT_VALUE_NONE 0x0
#define PWRMGR_CONTROL_LOW_POWER_HINT_VALUE_LOW_POWER 0x1
#define PWRMGR_CONTROL_CORE_CLK_EN_BIT 4
#define PWRMGR_CONTROL_CORE_CLK_EN_VALUE_DISABLED 0x0
#define PWRMGR_CONTROL_CORE_CLK_EN_VALUE_ENABLED 0x1
#define PWRMGR_CONTROL_IO_CLK_EN_BIT 5
#define PWRMGR_CONTROL_IO_CLK_EN_VALUE_DISABLED 0x0
#define PWRMGR_CONTROL_IO_CLK_EN_VALUE_ENABLED 0x1
#define PWRMGR_CONTROL_USB_CLK_EN_LP_BIT 6
#define PWRMGR_CONTROL_USB_CLK_EN_LP_VALUE_DISABLED 0x0
#define PWRMGR_CONTROL_USB_CLK_EN_LP_VALUE_ENABLED 0x1
#define PWRMGR_CONTROL_USB_CLK_EN_ACTIVE_BIT 7
#define PWRMGR_CONTROL_USB_CLK_EN_ACTIVE_VALUE_DISABLED 0x0
#define PWRMGR_CONTROL_USB_CLK_EN_ACTIVE_VALUE_ENABLED 0x1
#define PWRMGR_CONTROL_MAIN_PD_N_BIT 8
#define PWRMGR_CONTROL_MAIN_PD_N_VALUE_POWER_DOWN 0x0
#define PWRMGR_CONTROL_MAIN_PD_N_VALUE_POWER_UP 0x1
 
// The configuration registers CONTROL, WAKEUP_EN, RESET_EN are all written
// in the
#define PWRMGR_CFG_CDC_SYNC_REG_OFFSET 0x18
#define PWRMGR_CFG_CDC_SYNC_REG_RESVAL 0x0u
#define PWRMGR_CFG_CDC_SYNC_SYNC_BIT 0
 
// Configuration enable for wakeup_en register
#define PWRMGR_WAKEUP_EN_REGWEN_REG_OFFSET 0x1c
#define PWRMGR_WAKEUP_EN_REGWEN_REG_RESVAL 0x1u
#define PWRMGR_WAKEUP_EN_REGWEN_EN_BIT 0
 
// Bit mask for enabled wakeups (common parameters)
#define PWRMGR_WAKEUP_EN_EN_FIELD_WIDTH 1
#define PWRMGR_WAKEUP_EN_MULTIREG_COUNT 1
 
// Bit mask for enabled wakeups
#define PWRMGR_WAKEUP_EN_REG_OFFSET 0x20
#define PWRMGR_WAKEUP_EN_REG_RESVAL 0x0u
#define PWRMGR_WAKEUP_EN_EN_0_BIT 0
#define PWRMGR_WAKEUP_EN_EN_1_BIT 1
#define PWRMGR_WAKEUP_EN_EN_2_BIT 2
 
// A read only register of all current wake requests post enable mask (common
// parameters)
#define PWRMGR_WAKE_STATUS_VAL_FIELD_WIDTH 1
#define PWRMGR_WAKE_STATUS_MULTIREG_COUNT 1
 
// A read only register of all current wake requests post enable mask
#define PWRMGR_WAKE_STATUS_REG_OFFSET 0x24
#define PWRMGR_WAKE_STATUS_REG_RESVAL 0x0u
#define PWRMGR_WAKE_STATUS_VAL_0_BIT 0
#define PWRMGR_WAKE_STATUS_VAL_1_BIT 1
#define PWRMGR_WAKE_STATUS_VAL_2_BIT 2
 
// Configuration enable for reset_en register
#define PWRMGR_RESET_EN_REGWEN_REG_OFFSET 0x28
#define PWRMGR_RESET_EN_REGWEN_REG_RESVAL 0x1u
#define PWRMGR_RESET_EN_REGWEN_EN_BIT 0
 
// Bit mask for enabled reset requests
#define PWRMGR_RESET_EN_REG_OFFSET 0x2c
#define PWRMGR_RESET_EN_REG_RESVAL 0x0u
#define PWRMGR_RESET_EN_EN_0_BIT 0
 
// A read only register of all current reset requests post enable mask
// (common parameters)
#define PWRMGR_RESET_STATUS_VAL_FIELD_WIDTH 1
#define PWRMGR_RESET_STATUS_MULTIREG_COUNT 1
 
// A read only register of all current reset requests post enable mask
#define PWRMGR_RESET_STATUS_REG_OFFSET 0x30
#define PWRMGR_RESET_STATUS_REG_RESVAL 0x0u
#define PWRMGR_RESET_STATUS_VAL_0_BIT 0
 
// A read only register of escalation reset request
#define PWRMGR_ESCALATE_RESET_STATUS_REG_OFFSET 0x34
#define PWRMGR_ESCALATE_RESET_STATUS_REG_RESVAL 0x0u
#define PWRMGR_ESCALATE_RESET_STATUS_VAL_BIT 0
 
// Indicates which functions caused the chip to wakeup
#define PWRMGR_WAKE_INFO_CAPTURE_DIS_REG_OFFSET 0x38
#define PWRMGR_WAKE_INFO_CAPTURE_DIS_REG_RESVAL 0x0u
#define PWRMGR_WAKE_INFO_CAPTURE_DIS_VAL_BIT 0
 
// Indicates which functions caused the chip to wakeup.
#define PWRMGR_WAKE_INFO_REG_OFFSET 0x3c
#define PWRMGR_WAKE_INFO_REG_RESVAL 0x0u
#define PWRMGR_WAKE_INFO_REASONS_MASK 0x7u
#define PWRMGR_WAKE_INFO_REASONS_OFFSET 0
#define PWRMGR_WAKE_INFO_REASONS_FIELD \
  ((bitfield_field32_t) { .mask = PWRMGR_WAKE_INFO_REASONS_MASK, .index = PWRMGR_WAKE_INFO_REASONS_OFFSET })
#define PWRMGR_WAKE_INFO_FALL_THROUGH_BIT 3
#define PWRMGR_WAKE_INFO_ABORT_BIT 4
 
// A read only register that shows the existing faults
#define PWRMGR_FAULT_STATUS_REG_OFFSET 0x40
#define PWRMGR_FAULT_STATUS_REG_RESVAL 0x0u
#define PWRMGR_FAULT_STATUS_REG_INTG_ERR_BIT 0
#define PWRMGR_FAULT_STATUS_ESC_TIMEOUT_BIT 1
#define PWRMGR_FAULT_STATUS_MAIN_PD_GLITCH_BIT 2
 
#ifdef __cplusplus
}  // extern "C"
#endif
#endif  // _PWRMGR_REG_DEFS_
// End generated register defines for pwrmgr