Software APIs
dif_otp_ctrl_autogen.h File Reference

OTP_CTRL Device Interface Functions More...

#include <stdbool.h>
#include <stdint.h>
#include "sw/device/lib/base/macros.h"
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_base.h"
#include "dt/dt_otp_ctrl.h"

Go to the source code of this file.

Data Structures

struct  dif_otp_ctrl
 A handle to otp_ctrl. More...
 

Macros

#define kDifOtpCtrlIrqOtpOperationDone   kDtOtpCtrlIrqOtpOperationDone
 A otp_ctrl interrupt request type.
 
#define kDifOtpCtrlIrqOtpError   kDtOtpCtrlIrqOtpError
 An error has occurred in the OTP controller.
 

Typedefs

typedef struct dif_otp_ctrl dif_otp_ctrl_t
 A handle to otp_ctrl.
 
typedef enum dif_otp_ctrl_alert dif_otp_ctrl_alert_t
 A otp_ctrl alert type.
 
typedef dt_otp_ctrl_irq_t dif_otp_ctrl_irq_t
 
typedef uint32_t dif_otp_ctrl_irq_state_snapshot_t
 A snapshot of the state of the interrupts for this IP.
 
typedef uint32_t dif_otp_ctrl_irq_enable_snapshot_t
 A snapshot of the enablement state of the interrupts for this IP.
 

Enumerations

enum  dif_otp_ctrl_alert {
  kDifOtpCtrlAlertFatalMacroError = 0 ,
  kDifOtpCtrlAlertFatalCheckError = 1 ,
  kDifOtpCtrlAlertFatalBusIntegError = 2 ,
  kDifOtpCtrlAlertFatalPrimOtpAlert = 3 ,
  kDifOtpCtrlAlertRecovPrimOtpAlert = 4
}
 A otp_ctrl alert type. More...
 

Functions

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_init (mmio_region_t base_addr, dif_otp_ctrl_t *otp_ctrl)
 Creates a new handle for a(n) otp_ctrl peripheral.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_init_from_dt (dt_otp_ctrl_t dt, dif_otp_ctrl_t *otp_ctrl)
 Creates a new handle for a(n) otp_ctrl peripheral.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_get_dt (const dif_otp_ctrl_t *otp_ctrl, dt_otp_ctrl_t *dt)
 Get the DT handle from this DIF.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_alert_force (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_alert_t alert)
 Forces a particular alert, causing it to be escalated as if the hardware had raised it.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_type (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t, dif_irq_type_t *type)
 Returns the type of a given interrupt (i.e., event or status) for this IP.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_state (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_state_snapshot_t *snapshot)
 Returns the state of all interrupts (i.e., pending or not) for this IP.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_is_pending (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t, bool *is_pending)
 Returns whether a particular interrupt is currently pending.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge_state (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_state_snapshot_t snapshot)
 Acknowledges all interrupts that were pending at the time of the state snapshot.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge_all (const dif_otp_ctrl_t *otp_ctrl)
 Acknowledges all interrupts, indicating to the hardware that all interrupts have been successfully serviced.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t)
 Acknowledges a particular interrupt, indicating to the hardware that it has been successfully serviced.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_force (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t, const bool val)
 Forces a particular interrupt, causing it to be serviced as if hardware had asserted it.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_enabled (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t, dif_toggle_t *state)
 Checks whether a particular interrupt is currently enabled or disabled.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_set_enabled (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_t, dif_toggle_t state)
 Sets whether a particular interrupt is currently enabled or disabled.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_disable_all (const dif_otp_ctrl_t *otp_ctrl, dif_otp_ctrl_irq_enable_snapshot_t *snapshot)
 Disables all interrupts, optionally snapshotting all enable states for later restoration.
 
OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_restore_all (const dif_otp_ctrl_t *otp_ctrl, const dif_otp_ctrl_irq_enable_snapshot_t *snapshot)
 Restores interrupts from the given (enable) snapshot.
 

Detailed Description

OTP_CTRL Device Interface Functions

Definition in file dif_otp_ctrl_autogen.h.


Data Structure Documentation

◆ dif_otp_ctrl

struct dif_otp_ctrl

A handle to otp_ctrl.

This type should be treated as opaque by users.

Definition at line 38 of file dif_otp_ctrl_autogen.h.

Data Fields
mmio_region_t base_addr The base address for the otp_ctrl hardware registers.
dt_otp_ctrl_t dt The instance, set to kDtOtpCtrlCount if not initialized through dif_otp_ctrl_init_from_dt.

Macro Definition Documentation

◆ kDifOtpCtrlIrqOtpError

#define kDifOtpCtrlIrqOtpError   kDtOtpCtrlIrqOtpError

An error has occurred in the OTP controller.

Check the !!ERR_CODE register to get more information.

Definition at line 155 of file dif_otp_ctrl_autogen.h.

◆ kDifOtpCtrlIrqOtpOperationDone

#define kDifOtpCtrlIrqOtpOperationDone   kDtOtpCtrlIrqOtpOperationDone

A otp_ctrl interrupt request type.

DEPRECATED Use dt_otp_ctrl_irq_t instead. This enumeration exists solely for the transition to dt-based interrupt numbers and will be removed in the future.

The following are defines to keep the types consistent with DT. A direct access command or digest calculation operation has completed.

Definition at line 151 of file dif_otp_ctrl_autogen.h.

Typedef Documentation

◆ dif_otp_ctrl_irq_enable_snapshot_t

A snapshot of the enablement state of the interrupts for this IP.

This is an opaque type, to be used with the dif_otp_ctrl_irq_disable_all() and dif_otp_ctrl_irq_restore_all() functions.

Definition at line 265 of file dif_otp_ctrl_autogen.h.

◆ dif_otp_ctrl_irq_state_snapshot_t

A snapshot of the state of the interrupts for this IP.

This is an opaque type, to be used with the dif_otp_ctrl_irq_get_state() and dif_otp_ctrl_irq_acknowledge_state() functions.

Definition at line 163 of file dif_otp_ctrl_autogen.h.

◆ dif_otp_ctrl_irq_t

typedef dt_otp_ctrl_irq_t dif_otp_ctrl_irq_t

Definition at line 137 of file dif_otp_ctrl_autogen.h.

◆ dif_otp_ctrl_t

typedef struct dif_otp_ctrl dif_otp_ctrl_t

A handle to otp_ctrl.

This type should be treated as opaque by users.

Enumeration Type Documentation

◆ dif_otp_ctrl_alert

A otp_ctrl alert type.

Enumerator
kDifOtpCtrlAlertFatalMacroError 

This alert triggers if hardware detects an uncorrectable error during an OTP transaction, for example an uncorrectable ECC error in the OTP array.

kDifOtpCtrlAlertFatalCheckError 

This alert triggers if any of the background checks fails.

This includes the digest checks and concurrent ECC checks in the buffer registers.

kDifOtpCtrlAlertFatalBusIntegError 

This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected.

kDifOtpCtrlAlertFatalPrimOtpAlert 

Fatal alert triggered inside the OTP primitive, including fatal TL-UL bus integrity faults of the test interface.

kDifOtpCtrlAlertRecovPrimOtpAlert 

Recoverable alert triggered inside the OTP primitive.

Definition at line 99 of file dif_otp_ctrl_autogen.h.

Function Documentation

◆ dif_otp_ctrl_alert_force()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_alert_force ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_alert_t alert )

Forces a particular alert, causing it to be escalated as if the hardware had raised it.

Parameters
otp_ctrlA otp_ctrl handle.
alertThe alert to force.
Returns
The result of the operation.

Definition at line 63 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_get_dt()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_get_dt ( const dif_otp_ctrl_t * otp_ctrl,
dt_otp_ctrl_t * dt )

Get the DT handle from this DIF.

If this DIF was initialized by dif_otp_ctrl_init_from_dt(dt, ..) then this function will return dt. Otherwise it will return an error.

Parameters
otp_ctrlA otp_ctrl handle.
[out]dtDT handle.
Returns
kDifBadArg if the DIF has no DT information, kDifOk otherwise.

Definition at line 53 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_init()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_init ( mmio_region_t base_addr,
dif_otp_ctrl_t * otp_ctrl )

Creates a new handle for a(n) otp_ctrl peripheral.

This function does not actuate the hardware.

Parameters
base_addrThe MMIO base address of the otp_ctrl peripheral.
[out]otp_ctrlOut param for the initialized handle.
Returns
The result of the operation.

DEPRECATED This function exists solely for the transition to dt-based DIFs and will be removed in the future.

Definition at line 26 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_init_from_dt()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_init_from_dt ( dt_otp_ctrl_t dt,
dif_otp_ctrl_t * otp_ctrl )

Creates a new handle for a(n) otp_ctrl peripheral.

This function does not actuate the hardware.

Parameters
dtThe devicetable description of the device.
[out]otp_ctrlOut param for the initialized handle.
Returns
The result of the operation.

Definition at line 40 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_acknowledge()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq )

Acknowledges a particular interrupt, indicating to the hardware that it has been successfully serviced.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
Returns
The result of the operation.

Definition at line 226 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_acknowledge_all()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge_all ( const dif_otp_ctrl_t * otp_ctrl)

Acknowledges all interrupts, indicating to the hardware that all interrupts have been successfully serviced.

Parameters
otp_ctrlA otp_ctrl handle.
Returns
The result of the operation.

Definition at line 207 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_acknowledge_state()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_acknowledge_state ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_state_snapshot_t snapshot )

Acknowledges all interrupts that were pending at the time of the state snapshot.

Parameters
otp_ctrlA otp_ctrl handle.
snapshotInterrupt state snapshot.
Returns
The result of the operation.

Definition at line 165 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_disable_all()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_disable_all ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_enable_snapshot_t * snapshot )

Disables all interrupts, optionally snapshotting all enable states for later restoration.

Parameters
otp_ctrlA otp_ctrl handle.
[out]snapshotOut-param for the snapshot; may be NULL.
Returns
The result of the operation.

Definition at line 334 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_force()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_force ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq,
const bool val )

Forces a particular interrupt, causing it to be serviced as if hardware had asserted it.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
valValue to be set.
Returns
The result of the operation.

Definition at line 251 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_get_enabled()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_enabled ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq,
dif_toggle_t * state )

Checks whether a particular interrupt is currently enabled or disabled.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
[out]stateOut-param toggle state of the interrupt.
Returns
The result of the operation.

Definition at line 276 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_get_state()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_state ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_state_snapshot_t * snapshot )

Returns the state of all interrupts (i.e., pending or not) for this IP.

Parameters
otp_ctrlA otp_ctrl handle.
[out]snapshotOut-param for interrupt state snapshot.
Returns
The result of the operation.

Definition at line 148 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_get_type()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_get_type ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq,
dif_irq_type_t * type )

Returns the type of a given interrupt (i.e., event or status) for this IP.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
[out]typeOut-param for the interrupt type.
Returns
The result of the operation.

Definition at line 129 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_is_pending()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_is_pending ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq,
bool * is_pending )

Returns whether a particular interrupt is currently pending.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
[out]is_pendingOut-param for whether the interrupt is pending.
Returns
The result of the operation.

Definition at line 182 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_restore_all()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_restore_all ( const dif_otp_ctrl_t * otp_ctrl,
const dif_otp_ctrl_irq_enable_snapshot_t * snapshot )

Restores interrupts from the given (enable) snapshot.

Parameters
otp_ctrlA otp_ctrl handle.
snapshotA snapshot to restore from.
Returns
The result of the operation.

Definition at line 361 of file dif_otp_ctrl_autogen.c.

◆ dif_otp_ctrl_irq_set_enabled()

OT_WARN_UNUSED_RESULT dif_result_t dif_otp_ctrl_irq_set_enabled ( const dif_otp_ctrl_t * otp_ctrl,
dif_otp_ctrl_irq_t irq,
dif_toggle_t state )

Sets whether a particular interrupt is currently enabled or disabled.

Parameters
otp_ctrlA otp_ctrl handle.
irqAn interrupt request.
stateThe new toggle state for the interrupt.
Returns
The result of the operation.

Definition at line 303 of file dif_otp_ctrl_autogen.c.